New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Impact Windows & Doors Across Sunrise
Impact window and door replacement in Sunrise, FL typically runs $800-$1,500 per opening for standard sizes, with whole-home packages starting around $8,000 and running past $25,000 for larger properties. Most jobs are installed in as fast as a single day once your units arrive from the fabricator, though custom HVHZ-rated orders run 4-6 weeks. Call (754) 666-7478 to schedule your free measured survey and written quote.
Our crews serve Sunrise from our Miami-area dispatch office, and we know the difference between a Broward County HVHZ inspection and one in Palm Beach. That matters here. Sunrise sits entirely inside Broward’s High-Velocity Hurricane Zone, and the Building Division at 1 N. University Drive rejects installations when the Florida Product Approval label doesn’t explicitly list the HVHZ category. We’ve seen it happen to contractors who crossed county lines without checking.
Why Sightline Windows & Doors Fort Lauderdale Is Sunrise’s Preferred Impact Windows & Doors Company
We’ve measured openings in the Sunrise Golf Village area, replaced oxidized aluminum sliders in the Welleby plats off Oakland Park Boulevard, and pulled permits for condo associations along Pine Island Road. Sonia Raman built this operation under the Haven Standard in 2012, and every one of the 18,000+ windows and doors we’ve installed since then carried a written price before work started and a documented photo record when it finished.
Our Impact Windows & Doors team doesn’t quote from a truck. We arrive with a laser measure, a level, and a camera. You keep the measured survey. The written quote matches it exactly. Haven Clause 1.
Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The person at your door is the person on the record. Calls are answered by a live person, 24/7. Not a voicemail queue.
The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. If it’s not done right, we make it right. That’s written into the Haven Standard, not a verbal assurance.
Before
AfterOur Impact Windows & Doors Services in Sunrise
Impact-Resistant Windows
Every replacement window in Sunrise must pass large-missile impact and cyclic-pressure testing to TAS standards - the HVHZ protocol, not the ASTM-based standards used in non-HVHZ counties to the north. We specify laminated glass interlayers, reinforced frames, and design pressures matched to each opening’s wind zone and exposure. For a typical 1970s CBS home in Sunrise, that means replacing original single-pane aluminum units with impact-rated vinyl or aluminum frames rated to the correct PSF. We carry CWS and ES Windows lines specified by what your opening requires, not by what is in stock.
Hurricane Impact Windows
Hurricane impact windows in Sunrise are not a product category separate from HVHZ compliance - they are the same thing, done correctly. The distinction matters because some installers sell “hurricane-rated” products that carry a Florida Product Approval but lack the HVHZ category on the label. Broward’s inspectors will red-tag those at final inspection. We verify the approval number against the HVHZ list before we pull the permit. Every time.
Single Hung Impact Windows
Single hung impact windows - fixed upper sash, operable lower sash - are the most common replacement style for the original vertical-slider openings in Sunrise’s 1960s-70s planned-community homes. The fixed upper unit simplifies the impact rating because there’s no operable hardware to fail under pressure. In Sunrise’s inland position, salt-air humidity still accelerates frame oxidation on original aluminum units, so we often recommend vinyl or thermally broken aluminum frames with a low-U-factor coating. Typical installed price: $900-$1,800 per opening.
Double Hung Impact Windows
Double hung impact windows, with both sashes operable, suit second-story bedrooms and anywhere you need top-down ventilation. In Sunrise’s older homes near Nob Hill Road and Sunset Strip, we find original double-hung aluminum units where the sash balances have corroded through and the frames are no longer square. New impact units won’t seal properly against a racked opening. Our measured survey includes frame squareness readings and jamb condition notes - prep work that’s included in our written scope, not discovered as a change order later.
Horizontal Roller & Sliding Impact Windows
Horizontal roller impact windows are the natural replacement for the original sliding glass doors and wide kitchen windows common in Sunrise’s ranch-style CBS homes. The roller mechanism must be rated for the weight of laminated glass, and the interlock between fixed and operable panels is where cheap units fail under cyclic pressure. We specify ECO Window Systems and Mr-Glass lines for these openings, selected by design pressure and frame depth requirements. Large openings or custom configurations run $2,500-$5,000 installed.
Wind Mitigation & HVHZ Code Compliance
This is where a compliant quote separates from a cheap one. A proper Sunrise wind mitigation package includes: the Florida Product Approval number explicitly listing HVHZ compliance for each product configuration; design pressure calculations matched to the opening’s exposure, height, and wind zone; and the wind mitigation inspection form (OIR-B1-1802) completed by a licensed inspector after installation. We provide the product approval sheets and guide you through the inspection scheduling. Without this documentation, your openings don’t qualify for windstorm premium credits under Florida Statute 627.0629.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We work with eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by margin. For Sunrise’s HVHZ requirements, we typically draw from CWS and ES Windows for vinyl impact frames, ECO Window Systems for thermally improved aluminum, and Mr-Glass for high-performance laminated packages. We don’t stock inventory in a warehouse; we order to your measured opening after you approve the written quote. That eliminates the “close enough” install where a standard size gets forced into a non-standard opening.
Common Impact Windows & Doors Problems We See in Sunrise Homes
- HVHZ label failures at inspection. A contractor unfamiliar with Sunrise pulls a Florida Product Approval approved for Palm Beach County but missing the HVHZ category. Broward’s Building Division rejects it. The homeowner faces a costly re-order, re-install, and re-inspection. We verify every label before permit pull.
- Oxidized aluminum frames that won’t square. Original 1960s-70s aluminum units in Sunrise’s planned communities have corroded in the salt-air humidity. The jamb and sash are no longer square. New impact units leak at the corners if the opening isn’t prepped, shimmed, and flashed correctly. Our measured survey catches this before quote.
- Missing wind mitigation documentation. Homeowners accept a cheap quote that omits the design pressure calculation and product approval sheets. At claim time, the openings don’t qualify for windstorm credits. We include the documentation package as standard, not an upsell.
- Association aesthetic mismatches in multi-unit buildings. Condo and townhome clusters along University Drive and Pine Island Road require uniform product appearance across phases. We coordinate with association boards on color, grid pattern, and frame profile before ordering - avoiding the rejected variance that delays your install.
Pricing for Impact Windows & Doors in Sunrise, FL
Standard impact windows in Sunrise run $800-$1,500 per opening installed. Single hung impact units: $900-$1,800. Large or custom openings - picture windows, sliding wall systems, geometric shapes: $2,500-$5,000. Whole-home packages for typical 1960s-70s Sunrise single-family homes start around $8,000 and range past $25,000 depending on opening count, floor height, and frame material selection.
What moves the price in Sunrise: the HVHZ rating requirement (adds testing and certification cost versus non-HVHZ counties), floor height (design pressure increases with exposure), frame material (vinyl vs. thermally broken aluminum vs. impact-rated wood clad), and the condition of existing openings (rot, squareness, or stucco repair needs). We itemize every line in the written quote. The measured survey you keep and the final invoice are the same document. Haven Clause 1.
Call (754) 666-7478 for your free measured survey and written quote.
What Impact Windows & Doors Costs in Sunrise
| Product / Service | Typical Range in Sunrise |
|---|---|
| Standard impact window (installed) | $800 - $1,500 |
| Single hung impact window (installed) | $900 - $1,800 |
| Double hung impact window (installed) | $1,000 - $2,000 |
| Horizontal roller / sliding impact window (installed) | $1,200 - $2,500 |
| Large or custom opening (installed) | $2,500 - $5,000 |
| Whole-home package (typical Sunrise home) | $8,000 - $25,000+ |
These ranges reflect Broward County’s HVHZ compliance requirements, which add certification and testing costs compared to non-HVHZ markets. We don’t quote from tables - we measure your specific openings and itemize every cost in writing. Free in-home measure. Written quote. No change orders.
Florida Pays You Back
Several programs reduce the net cost of impact windows and doors in Sunrise. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades - the program sets eligibility and award amounts. Florida’s sales-tax exemption applies to impact-resistant windows and doors. The federal 25C energy credit provides 30% of product cost, up to $600 per year on qualifying energy-efficient units. After installation, a wind mitigation inspection ($75-$150) can qualify you for windstorm premium credits averaging around 25% on the windstorm portion of your policy - your carrier sets the final number. We provide the product documentation and guide you through the inspection process.
Impact Windows vs. Hurricane Shutters: The Permanent Difference
Hurricane shutters require installation before every storm, removal after, storage space, and the physical ability to hang panels or crank accordion systems. Impact windows are permanent protection - laminated glass stays in place year-round, maintains your home’s daylight and ventilation, and requires no action from you at 2 AM when a storm shifts track. In Sunrise’s HVHZ zone, impact windows also carry the product approval documentation that shutters alone cannot provide for wind mitigation credits. We install impact windows and doors, not shutters.
We Also Serve Cities Near Sunrise
Our crews work across Broward County and into adjacent markets. We regularly install Impact Windows & Doors in Sunrise and nearby Fort Lauderdale, Wilton Manors, Oakland Park, and Lauderdale Lakes. The same Haven Standard, the same written pricing, the same documented photo record - regardless of zip code.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Sunrise
Yes. Sunrise sits entirely within Broward County’s High-Velocity Hurricane Zone, and Broward’s Building Division requires a Florida Product Approval label that explicitly lists the HVHZ category. Palm Beach County is not an HVHZ jurisdiction, so products approved there often lack that specific line and will be rejected at final inspection in Sunrise. Call (754) 666-7478 and we’ll verify the correct approval numbers for your project - estimates are free.
Horizontal roller impact windows are the direct replacement for original sliding aluminum units in Sunrise’s 1970s CBS homes, maintaining the same operable direction and sightlines while meeting HVHZ impact requirements. Single hung impact windows work for original vertical-slider openings. Our measured survey determines exact frame depth and rough opening dimensions before we specify the product. Call (754) 666-7478 to schedule your free survey.
Yes, potentially. Florida Statute 627.0629 requires insurers to offer windstorm premium credits for documented wind-mitigation features, and impact-rated openings with proper HVHZ product approval and a completed OIR-B1-1802 inspection form typically qualify for credits averaging around 25% on the windstorm portion. The exact credit depends on your carrier and your home’s total mitigation profile. We provide the product approval sheets and guide you through the inspection. Call (754) 666-7478 for details.
A compliant quote includes: HVHZ-specific Florida Product Approval numbers for each product configuration; design pressure calculations matched to the opening’s exposure, height, and wind zone; permit fees and inspection scheduling; wind mitigation documentation; and a written scope with itemized costs that matches the measured survey. Cheap quotes often omit the HVHZ verification, the design pressure work, or the documentation package - leaving you with non-compliant installs and no path to insurance credits. Call (754) 666-7478 for a written quote that includes everything.
Yes. Low-E coatings with argon gas fill reduce solar heat gain (lower SHGC) and improve thermal resistance (lower U-factor), which directly reduces air conditioning load in Sunrise’s year-round cooling climate. The federal 25C credit applies to qualifying units. The savings depend on your home’s orientation, shading, and current cooling costs. We specify glass packages by performance metrics, not by name. Call (754) 666-7478 to review options for your specific openings.
We were called to a 1972 CBS home in the Sunrise Golf Village area off University Drive where the original single-pane aluminum sliders were fogging and the hollow-core front door had swollen shut after a summer storm. Our crew was careful to spec a PGT impact-rated glazing package with a laminated glass interlayer and the correct HVHZ Florida Product Approval number before we pulled the permit - our tech had seen too many installs rejected at Broward’s Building Division because the label didn’t carry that category. We replaced the sliders with horizontal roller impact units and set a Therma-Tru fiberglass entry door with a large-missile rating, then handed the homeowner the product approval sheets and a wind mitigation form she could send straight to her carrier.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale