New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise runs $800-$1,500 per opening for impact-rated units, with whole-home packages typically between $8,000 and $25,000 depending on frame material, floor height, and whether the home needs HVHZ-labeled product. We measure every opening on site, document the design pressure and Florida Product Approval number in the written quote, and install once your units clear custom fabrication - usually 4-6 weeks for impact-rated orders, single-day install once they arrive. Call (754) 666-7478 to schedule your free measured survey.
We serve Sunrise from our South Florida scheduling office, with crews working locally through neighborhoods like Welleby, Sawgrass Estates, and the original Sunrise Golf Village plats. The city’s 1960s-70s planned-community housing stock - concrete-block-and-stucco homes with original aluminum single-pane sliders - represents the bulk of what we measure and replace. That age of construction, combined with Broward County’s High-Velocity Hurricane Zone designation, means every job we quote carries specific compliance requirements that generic retail installers often miss.
Why Sightline Windows & Doors Fort Lauderdale Is Sunrise’s Preferred Window Replacement Company

We’ve installed and replaced windows and doors across more than 18,000 openings since 2012, every one with a written price before work started and a documented photo record when finished. In Sunrise specifically, that history means we’ve measured the original aluminum-frame sliders in Welleby ranch homes, documented the association aesthetic requirements for townhome clusters along University Drive, and pulled permits with the Broward County Building Division enough times to know which Florida Product Approval numbers carry the HVHZ category and which don’t.
Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The person at your door matches the person on the record. Calls route to a live person 24/7, not a voicemail queue. And our 365-Day Done Right Promise is written into the Haven Standard on every job, not offered as a courtesy after the fact.
We also run a free second-opinion service on any written estimate. Bring us a competitor’s quote and we’ll review the product spec, approval numbers, and permit scope at no charge. Homeowners in Sunrise use this most often when they’ve received a Palm Beach County bid that doesn’t account for Broward’s stricter HVHZ requirement.
Before
AfterOur Window Replacement Services in Sunrise
Full Frame Replacement
Full frame replacement removes the entire window unit - sash, frame, and often the exterior trim - down to the rough opening. In Sunrise’s 1960s-70s CBS homes, this is usually the correct path. The original aluminum frames are oxidized from salt-laden humidity, the fasteners are corroded, and the rough opening itself needs re-securing to meet current cyclic-pressure and large-missile impact standards. We specify PGT or CGI impact-rated units with the HVHZ category on the Florida Product Approval label, match the design pressure to your opening’s exposure, and pull the permit with the approval number documented for the inspector. The measured survey you keep shows every frame reading and sightline dimension; the written quote cannot differ from that document.

Insert Window Replacement
Insert replacement fits a new window into the existing frame, preserving exterior trim and reducing labor cost. This works only where the original frame is structurally sound and the fastening can be verified. In Sunrise, we rarely recommend inserts for 1970s aluminum single-pane sliders - the frames are too far gone, and cyclic-pressure requirements can’t be met without re-securing the rough opening. We will specify an insert only after measuring frame squareness, wall thickness, and fastener condition, and we’ll tell you plainly if it’s not suitable. No savings justify a job that fails inspection or leaves you without wind-mitigation credit documentation.

Vinyl Replacement Windows
Vinyl frames resist the salt-air humidity that accelerates oxidation on Sunrise’s original aluminum units. We specify vinyl from PGT, CWS, or ES Windows by performance tier and price range - not by margin. The product line we recommend depends on your opening’s design pressure requirement, your association’s aesthetic rules if you’re in a University Drive or Pine Island Road condo cluster, and whether you’re stacking this replacement with a My Safe Florida Home grant application. Every vinyl unit we quote carries the HVHZ label where required and the documented photo record on completion.

Energy-Efficient Upgrade
Energy-efficient upgrades in Sunrise pair impact-rated glazing with low-U-factor, low-SHGC glass to cut cooling load. The federal 25C energy credit covers 30% of product cost up to $600 per year on qualifying units. We document the U-factor and SHGC in your written quote for your tax preparer. In practice, most Sunrise homeowners stack this with the wind-mitigation credit - the same impact-rated windows that satisfy HVHZ also trigger the insurance discount. We were called to a 1972 CBS home off Pine Island Road where the original aluminum single-pane sliders were fogged and the frames pitted white from years of salt-laden humidity. We replaced them with PGT impact-rated glazing rated for the HVHZ designation, matching the laminated glass interlayer and design pressure to the openings, and pulled the permit with the approval number documented for the inspector. The homeowner used the compliance paperwork to pursue a wind mitigation credit, and the final inspection cleared on the first pass because the labels carried the HVHZ category.

Window Maintenance & Care
Maintenance on original aluminum single-pane units in Sunrise typically extends life by a season or two at most. The salt-air humidity has already begun frame oxidation; the glazing seal has already failed if you’re seeing fog between panes. We document what we find - frame readings, sightline measurements, product specs - and tell you whether maintenance is worth the cost or whether replacement is the sounder expenditure. Our Window Replacement team will always show you the written price for both paths before you decide.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise

We draw from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by what the opening requires, not by what is in stock. For Sunrise’s HVHZ zone, we most often quote PGT and CGI impact-rated product because their Florida Product Approvals explicitly list the HVHZ category on the label, the number Broward inspectors verify at final inspection. CWS and ES Windows fill specific performance tiers and price ranges for energy-efficient upgrades and custom geometries. We don’t stock inventory; we order to the measured survey, which means your units are fabricated to your opening’s exact sightline dimensions, not pulled from a warehouse and shimmed to fit.
Common Window Replacement Problems We See in Sunrise Homes
- HVHZ label missing at inspection. Crews pull a Florida Product Approval that’s approved for Florida but not explicitly labeled HVHZ, and Broward’s Building Division rejects it at final inspection - forcing a costly re-order. We document the approval number in your quote and photograph the label on every unit before installation.
- Insert replacement into compromised original frames. Insert replacement into the original 1960s-70s aluminum frames skips re-securing the rough opening, so cyclic-pressure and large-missile requirements aren’t met even though the glass is impact-rated. We measure frame condition before recommending this path.
- Condo association aesthetic violations. Condo and townhome clusters near University Drive get individual-unit swaps with mismatched products, violating the association’s uniform-aesthetic rule and stalling the Certificate of Occupancy. We review association documents before quoting and specify product lines that maintain visual consistency.
- Missing documentation blocks insurance credits. Cheap quotes leave out the permit, the documented approval number, and the wind-mitigation paperwork - leaving the homeowner unable to claim the insurance credit later. Our Haven Standard requires every job to leave a documented photo record and compliance packet.
What Window Replacement Costs in Sunrise

| Service / Product Type | Price Range in Sunrise |
|---|---|
| Impact-rated window (standard single-hung) | $800 - $1,500 installed |
| Impact single-hung, mid-grade | $900 - $1,800 installed |
| Large or custom openings | $2,500 - $5,000 installed |
| Whole-home package (typical 3/2 CBS) | $8,000 - $25,000+ |
What moves the price in Sunrise: floor height (second-story openings add ladder and safety time), frame material (vinyl vs. aluminum vs. fiberglass), design pressure requirement (higher exposure ratings need thicker laminated interlayers), and whether the rough opening needs re-securing or rot repair. The HVHZ designation itself doesn’t add cost - it’s a product specification, not a surcharge - but units without it get rejected, so the “savings” from a non-HVHZ quote is pure loss.
Every engagement begins with a measured survey you keep. The written quote cannot differ from that document. Call (754) 666-7478 for your free in-home measure and written scope.
Pricing for Window Replacement in Sunrise, FL
We don’t do “starting at” pricing or phone estimates. The measurement and the quote are the same document - Haven Clause 1 since 2012. For a typical Sunrise home, expect impact-rated replacement windows to run $800-$1,500 per opening installed, with whole-home packages scaling from $8,000 to $25,000 depending on opening count, product tier, and structural conditions we find. Custom geometric or large-format units run $2,500-$5,000. We name the full price in writing before any work starts, including permit fees, disposal, and the documented photo record. No change orders, no surprises. Call (754) 666-7478 to schedule your free measured survey - estimates are free, and we review competitor quotes at no charge.
Florida Pays You Back

Several programs stack for Sunrise homeowners replacing windows with impact-rated, HVHZ-compliant product:
- My Safe Florida Home matching grants: up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated windows and doors. The program sets final eligibility; we document your product spec and approval numbers for your application.
- Florida sales-tax exemption: impact-resistant windows and doors are exempt from state sales tax. We itemize this on your written quote.
- Federal 25C energy credit: 30% of product cost, up to $600 per year on qualifying energy-efficient units. We document U-factor and SHGC for your tax preparer.
- Windstorm-premium credits: averaging around 25% on the windstorm portion of your premium after a qualifying wind-mitigation inspection ($75-$150). The inspection requires HVHZ-compliant product with documented approval numbers - the same paperwork we provide on every job.
Programs and carriers set final numbers; we don’t guarantee eligibility. We do guarantee documented compliance paperwork on every installation, which is what unlocks the credit.
We Also Serve Cities Near Sunrise
Our crews work throughout central and east Broward County, including Window Replacement in Sunrise as well as Fort Lauderdale, Wilton Manors, Oakland Park, and Lauderdale Lakes. Every job runs under the same Haven Standard: written price before work starts, verified crew, documented evidence on completion. Dispatch and scheduling are coordinated from our Miami office; crews serve Sunrise locally.
Serving Sunrise, FL - Our Local Coverage Area

We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
Yes. Sunrise sits entirely within Broward County’s High-Velocity Hurricane Zone, and the Building Division rejects any Florida Product Approval that doesn’t explicitly list the HVHZ category on the label. That single line is the most common reason a job passes or fails final inspection. We document the approval number in your quote and photograph every label before installation. Call (754) 666-7478 for a free measured survey - estimates are free.
Palm Beach County is not an HVHZ zone, so product approved for Florida but not explicitly HVHZ-labeled is legal there and common in their supply chains. Broward inspectors reject that same product. We’ve seen crews new to the Sunrise market pull approved-but-non-HVHZ units, only to face costly re-orders after final inspection failure. We specify product by what the opening requires, not by what is in stock. Call (754) 666-7478 for a free second opinion on any written estimate.
Yes, if the installation is documented with HVHZ-compliant product and you complete a wind-mitigation inspection. Most carriers apply windstorm-premium credits averaging around 25% on the windstorm portion. The key is the compliance paperwork - approval numbers, permit documentation, and the inspector’s verification that the installed product matches. We provide this packet on every job. Call (754) 666-7478 to schedule your free measured survey and learn what your specific opening configuration would qualify for.
They can be repaired short-term, but replacement is the sounder expenditure. The aluminum frames are oxidized from salt-air humidity, the glazing seals have failed if you’re seeing fog, and the original units carry no impact rating or design pressure documentation. Repair won’t satisfy HVHZ requirements or unlock wind-mitigation credits. We document frame condition in your measured survey and quote both paths so you can compare. Call (754) 666-7478 - estimates are free.
Most associations along University Drive and Pine Island Road require uniform product aesthetics across the building or phase, meaning your replacement must match existing units in frame color, grille pattern, and sightline dimensions. Some also mandate specific manufacturer lines. We review association documents before quoting and specify product that maintains visual consistency. Individual-unit swaps with mismatched products stall the Certificate of Occupancy. Call (754) 666-7478 and we’ll confirm your association’s requirements during the measured survey.
Ready for your written price? Call (754) 666-7478 to schedule your free measured survey. Every quote includes the documented Florida Product Approval number, the design pressure matched to your opening, and the Haven Standard compliance packet you’ll need for inspection and insurance credits. The measurement and the quote are the same document - they always have been.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise and Broward County since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
