New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Wilton Manors, FL
Window and door installation in Wilton Manors typically runs $800-$4,500 per opening depending on product tier and frame condition, with most full-home projects on the city’s 1950s-1960s concrete-block ranches requiring custom sizing to replace original jalousie windows. Every job we take in Wilton Manors begins with a measured survey you keep, and the written quote matches that document exactly - Haven Clause 1. Call (754) 666-7478 to schedule your free estimate.
We’re Sightline Windows & Doors, independently owned and operated under the Haven Standard since 2012. Our crews serve Wilton Manors from our South Florida office, carrying eight manufacturer lines and the documentation tools to record every frame reading and sightline measurement before we quote.
Why Wilton Manors Homes Are Different

Wilton Manors sits on roughly 2.5 square miles of dense, canal-threaded Broward County land, about 4 miles from the Atlantic. The housing stock is overwhelmingly concrete-block ranch homes built from the late 1940s through the early 1970s, many still fitted with original single-pane jalousie windows - glass louvers that rotate open on a crank and seal poorly against both wind and water intrusion. Because Broward County falls within Florida’s High Velocity Hurricane Zone, every replacement window or door must carry a Miami-Dade NOA or HVHZ-specific Florida Product Approval, a stricter standard than most of the state requires.
The salt-laden humidity here corrodes aluminum frames and hardware faster than in inland Central Florida, shortening the life of builder-grade units. Mature ficus and sea-grape hedges, combined with narrow lots and zero-lot-line setbacks, make exterior scaffold or swing staging impractical on many Wilton Manors properties. Nearly all window swaps are done from the interior, which demands familiarity with inside-mount impact frames and stucco patch work on the exterior buck edges.
Before
AfterOur Main Wilton Manors Services
Most calls we field from Wilton Manors homeowners center on two needs: replacing the original jalousie windows with code-compliant impact units, and upgrading entry points to eliminate storm shutters entirely. Here is how we approach the work.
Window Replacement in Wilton Manors
In Wilton Manors, window replacement means pulling out jalousie or early aluminum single-pane units and installing impact-rated, HVHZ-approved windows that fit the original block openings - often with custom frame-out work because the rough openings were never designed for modern frames. We measure every buck and jamb from the interior, document the sightline with photos you receive, and specify products from our verified lines based on performance tier, not stock levels. Window Replacement in Wilton Manors

Impact Windows & Doors in Wilton Manors
Impact windows and doors in Wilton Manors are not optional upgrades; they are the baseline for code compliance and insurance savings in this HVHZ zone. We specify laminated glass and reinforced frames from PGT, CGI, CWS, and ES Windows, each with current Florida Product Approval, and we pull permits through Broward County for every installation. The documented photo record shows the NOA label, the fastening pattern, and the final sealant bead. Impact Windows & Doors in Wilton Manors

Sliding & Patio Doors in Wilton Manors
Sliding and patio door replacement in Wilton Manors addresses the same jalousie-era problem: original doors are often single-glazed aluminum sliders with corroded rollers and no wind-load rating. We install multi-panel impact-rated systems with stainless steel hardware rated for salt-air exposure, measuring the header and sill conditions from inside because exterior staging is blocked by hedges or setbacks on most lots. Sliding & Patio Doors in Wilton Manors

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Wilton Manors

Window installation in Wilton Manors means fitting modern impact-rated units into concrete-block openings originally sized for jalousie or early aluminum windows - openings that are rarely square and often require frame-out modification. The salt air, dense hedge screening, and interior-only access on most lots make precise measurement and interior-mount expertise essential before any product is ordered. We begin every Window Installation with a measured survey you keep, and the written quote cannot deviate from that document.
Single & Double Hung Windows
Signs you need it
Your existing jalousie or aluminum single-hung units leak air, rattle in wind, or show corrosion at the sill; upstairs bedrooms in Wilton Manors ranches often still have original 1950s operable louvers with no impact rating.
What it costs in Wilton Manors
Single and double hung impact window installation in Wilton Manors typically ranges from $1,200 to $2,800 per opening, with frame-out work on older block openings adding $200-$400 per unit.
How we do it
We measure the rough opening from the interior, specify the frame depth for your block wall thickness, install with Tapcon or powder-actuated fasteners into the concrete buck, seal with backer rod and polyurethane, and document the sightline and fastener spacing with photos you receive.
Horizontal Roller Windows
Signs you need it
Your current horizontal slider has bent tracks, corroded rollers, or a failed lock; many Wilton Manors ranches used aluminum rollers that seize in salt air within 8-12 years.
What it costs in Wilton Manors
Horizontal roller impact window installation in Wilton Manors typically runs $1,400 to $3,200 per opening, with wider two-panel configurations at the upper end and standard 36-inch widths at the lower.
How we do it
We verify the sill level and header condition, set the frame plumb with composite shims, install the operable panel with stainless steel rollers, test the lock engagement, and record the U-factor and SHGC ratings from the glass label for your permit documentation.
What Window Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung Impact Window | $1,200 - $2,800 |
| Horizontal Roller Impact Window | $1,400 - $3,200 |
| Frame-out modification (per opening) | $200 - $400 |
Do you pull permits for window installation in Wilton Manors?
Yes. Every window installation in Wilton Manors requires a Broward County permit because the city enforces HVHZ product approval and Miami-Dade NOA standards. We pull the permit, schedule inspection, and pass it before final payment. Call (754) 666-7478 to schedule your free estimate.
How long does window installation take in Wilton Manors?
Most Wilton Manors window installations run 1-2 days for a full-home replacement of 8-12 openings, assuming no structural modifications. Custom frame-out work on jalousie-era block openings can add a half day. Call (754) 666-7478 for a written timeline with your estimate.
Door Installation in Wilton Manors

Door installation in Wilton Manors faces the same jalousie-era constraints: original entry doors are often hollow-core or early steel units in aluminum frames, set into concrete-block openings with no impact rating and corroded hardware from decades of salt exposure. We replace these with HVHZ-approved entry systems, measuring from the interior when hedges or setbacks block exterior access, and we document every jamb reading and fastener location. Our Door Installation process follows the Haven Standard: the measured survey you keep and the written quote are the same document.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door shows rust at the sill, air leaks around the jamb, or the deadbolt no longer seats flush; many Wilton Manors ranches still have original 1960s hollow-core doors with no wind-load rating.
What it costs in Wilton Manors
Hurricane-proof front and entry door installation in Wilton Manors typically ranges from $2,800 to $6,500 including frame, hardware, and permit, with fiberglass impact units at the lower end and decorative glass or sidelite configurations at the upper.
How we do it
We measure the rough opening and wall thickness, specify a pre-hung impact-rated unit with stainless steel hinges, set the frame plumb in the block opening with composite shims, fasten through the jamb into the concrete buck, install the multi-point lock, and document the NOA label and fastener pattern.
French & Double Doors
Signs you need it
Your French doors stick at the center meeting stile, show daylight between the panels, or have corroded multipoint hardware; original aluminum French doors in Wilton Manors often sag after 15 years of salt-air exposure.
What it costs in Wilton Manors
French and double door installation in Wilton Manors typically runs $3,500 to $8,000 for impact-rated units, with out-swing configurations and retractable screen additions at the upper end.
How we do it
We verify the header can support the wider span, install a reinforced composite sill pan, set both panels with integrated astragal and multi-point locking, adjust the hinges for uniform reveal, and test the operation before documenting the installation with photos.
What Door Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Hurricane-Proof Front & Entry Door | $2,800 - $6,500 |
| French & Double Doors | $3,500 - $8,000 |
| Frame modification (block opening) | $300 - $600 |
Do I need a permit to replace my front door in Wilton Manors?
Yes. Broward County requires a permit for any entry door replacement in Wilton Manors because HVHZ wind-load standards apply to all exterior openings. We pull the permit and schedule inspection. Call (754) 666-7478 for a free estimate with permit costs included.
Can you match my door to the original mid-century style?
Yes. We specify flush-panel and louvered fiberglass entry doors from Therma-Tru and ViewLux that meet HVHZ ratings while matching the 1950s-1960s ranch aesthetic common in Wilton Manors. Call (754) 666-7478 to see samples and get a written quote.
Energy-Efficient Windows in Wilton Manors

Energy-efficient windows in Wilton Manors solve a specific problem: the original jalousie and single-pane aluminum units in the city’s 1950s-1960s ranches have no thermal break, no low-E coating, and air leakage rates that drive cooling costs upward in summer. We specify replacement units with measured U-factors and SHGC values appropriate for Broward County’s cooling-dominated climate, installed with proper air sealing at the block buck. Energy-Efficient Windows from Sightline include the documented performance data you need for any utility rebate or insurance documentation.
Low-E & Argon Gas Glass
Signs you need it
Your floors and furniture show fading near windows, or you feel radiant heat through the glass on south- and west-facing walls; jalousie windows transmit nearly all solar heat gain.
What it costs in Wilton Manors
Low-E with argon gas fill in Wilton Manors typically adds $80-$150 per window over standard laminated impact glass, with payback periods of 4-7 years on cooling costs in this climate.
How we do it
We specify the coating layer and gas fill based on your orientation and shading, verify the spacer is warm-edge stainless or composite, record the NFRC label data, and include the U-factor and SHGC in your written documentation.
Insulated Laminated Glass
Signs you need it
You want both impact protection and thermal performance in one unit; standard laminated glass alone has no insulating airspace.
What it costs in Wilton Manors
Insulated laminated glass units in Wilton Manors typically range from $1,600 to $3,500 per opening, combining two lites with a polyvinyl butyral interlayer and sealed airspace.
How we do it
We measure for the thicker overall unit depth, verify the frame can accommodate the 1-inch total glass package, install with setting blocks and edge clearances per manufacturer spec, and document the visible transmittance and solar heat gain coefficient.
What Energy-Efficient Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Low-E & Argon Gas upgrade | $80 - $150 per window |
| Insulated Laminated Glass unit | $1,600 - $3,500 |
| ENERGY STAR full replacement | $1,400 - $3,000 |
Will energy-efficient windows lower my FPL bill in Wilton Manors?
Yes. Replacing single-pane jalousie windows with low-E, argon-filled impact units typically reduces cooling load 15-25% in Wilton Manors ranches, with the greatest savings on west- and south-facing walls. Call (754) 666-7478 for a written estimate with projected performance data.
Do energy-efficient windows still meet hurricane code?
Yes. Every energy-efficient window we install in Wilton Manors carries the same Miami-Dade NOA or Florida Product Approval as standard impact units; the low-E coating and argon fill are added to laminated or insulated laminated glass that already meets HVHZ standards. Call (754) 666-7478 to review the NOA documentation.
Impact Garage Doors in Wilton Manors

Impact garage doors in Wilton Manors protect the largest opening in most homes, yet many 1950s-1960s ranches still have non-rated, single-layer steel or wood-panel doors with no wind-load certification. A failed garage door in a hurricane pressurizes the entire structure, which is why Broward County enforces HVHZ standards on all garage door replacements. We specify wind-rated systems with proper track anchorage into the concrete lintel and block jambs, and we document the installation with photos of the spring assembly, track fasteners, and windload sticker. Impact Garage Doors from Sightline include the 365-Day Done Right Promise.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, shows rust at the bottom panel, or rattles in moderate wind; original Wilton Manors garage doors were rarely rated beyond 90 mph.
What it costs in Wilton Manors
Hurricane-rated garage door installation in Wilton Manors typically ranges from $2,200 to $5,500 for a standard two-car opening, with insulated sandwich construction and windows at the upper end.
How we do it
We measure the opening and headroom, specify the wind-load rating for your exposure category, install heavy-duty track with concrete anchors into the lintel, set the torsion spring assembly with proper winding, and document the wind-load label and fastener pattern.
Wind-Load Code Compliance
Signs you need it
Your permit application was rejected for insufficient garage door documentation, or your insurance renewal requires proof of HVHZ-rated garage protection.
What it costs in Wilton Manors
Wind-load code compliance upgrades in Wilton Manors typically run $1,800 to $4,000 if the existing track and spring assembly can be retained, or $2,800 to $6,500 for full replacement with a rated door system.
How we do it
We verify the existing door’s rating from manufacturer data or field inspection, calculate the required wind-load pressure for your specific address, specify the appropriate door and track system, pull the Broward County permit, and pass inspection before final documentation.
What Impact Garage Doors Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Hurricane-Rated Garage Door (2-car) | $2,200 - $5,500 |
| Wind-Load Code Compliance upgrade | $1,800 - $4,000 |
| Full replacement with rated system | $2,800 - $6,500 |
Do I need a permit to replace my garage door in Wilton Manors?
Yes. Broward County requires a permit for all garage door replacements in Wilton Manors because the garage door is a critical wind-load component in HVHZ zones. We pull the permit, provide the product approval documentation, and schedule inspection. Call (754) 666-7478 for a free estimate.
Can I keep my existing garage door opener?
Sometimes. If your opener is less than 10 years old and the rail can be adapted to the new impact door’s weight and height, we reinstall it. Heavier insulated impact doors often require a higher-horsepower unit. Call (754) 666-7478 and we’ll assess it during the measured survey.
Custom & Geometric Windows in Wilton Manors

Custom and geometric windows in Wilton Manors address a design opportunity created by the city’s renovation wave: homeowners updating 1950s-1960s ranches want to preserve or enhance the mid-century character while meeting HVHZ standards. Original jalousie banks, clerestory strips, and accent windows were never designed for impact loads, so we engineer custom shapes with laminated glass and reinforced frames that carry Miami-Dade NOA approval. Custom & Geometric Windows from Sightline include full templating and a written price before fabrication begins.
Geometric & Shaped Windows
Signs you need it
You have triangular gable windows, octagonal accent units, or trapezoid clerestories that are still single-pane or jalousie-style and need impact replacement without losing the original silhouette.
What it costs in Wilton Manors
Geometric and shaped window installation in Wilton Manors typically ranges from $2,500 to $6,000 per opening, with templating, custom frame fabrication, and HVHZ engineering review included.
How we do it
We create a physical or digital template of the existing opening, submit it to the manufacturer for engineering review and Florida Product Approval, fabricate the custom frame with laminated glass, install with specialized flashing for the non-rectangular geometry, and document the final sightline and sealant continuity.
Arched & Curved Windows
Signs you need it
Your ranch has a segmented arch or radius-top window over the entry or in a gable end, and the original is single-pane or leaking at the curved sill.
What it costs in Wilton Manors
Arched and curved window installation in Wilton Manors typically runs $3,200 to $7,500 per opening, with true radius construction at the upper end and segmented arch approximations at the lower.
How we do it
We measure the springline, rise, and chord length, specify a fixed or operable arched unit with custom jamb liners, set the frame with radial shimming to maintain the curve, seal with backer rod and compatible sealant, and record the template and installation photos in your job file.
What Custom & Geometric Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Geometric & Shaped Windows | $2,500 - $6,000 |
| Arched & Curved Windows | $3,200 - $7,500 |
| Oversized custom opening (per sq ft) | $45 - $85 |
How long does custom window fabrication take?
Custom and geometric windows typically require 6-10 weeks from template approval to delivery in Wilton Manors, with HVHZ engineering review adding 1-2 weeks over standard rectangular units. We do not collect final payment until fabrication is complete and the unit is in our possession. Call (754) 666-7478 to start the templating process.
Can you match a custom shape to my existing jalousie bank?
Yes. We template the existing opening, including the mullion spacing if you want to preserve the visual rhythm, and engineer an impact-rated fixed or operable unit that fits the same silhouette. The frame depth will increase to accommodate laminated glass. Call (754) 666-7478 for a measured survey and written quote.
Brands We Service in Wilton Manors
We specify from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by what the opening requires, not by margin. For Wilton Manors jobs, we frequently draw from CGI and CWS for impact-rated aluminum, ES Windows for thermally broken vinyl, and ECO Window Systems for energy-efficient configurations. We stock common hardware and weatherstrip locally, so most service calls do not wait on parts. See our brands for full specifications and performance data.
Pricing for Windows & Doors in Wilton Manors, FL

| Service | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung Impact Window | $1,200 - $2,800 |
| Horizontal Roller Impact Window | $1,400 - $3,200 |
| Low-E & Argon Gas upgrade | $80 - $150 per window |
| Insulated Laminated Glass unit | $1,600 - $3,500 |
| Hurricane-Proof Front & Entry Door | $2,800 - $6,500 |
| French & Double Doors | $3,500 - $8,000 |
| Hurricane-Rated Garage Door (2-car) | $2,200 - $5,500 |
| Geometric & Shaped Windows | $2,500 - $6,000 |
| Arched & Curved Windows | $3,200 - $7,500 |
| Frame-out modification (per opening) | $200 - $400 |
Prices in Wilton Manors push upward when block openings require frame-out work, when interior-only access slows the installation, or when custom sizing is needed for non-standard jalousie replacements. The price we write before any work starts is the price on the final invoice - Haven Clause 1, no exceptions.
Neighborhoods We Serve in Wilton Manors
Our crews work throughout Wilton Manors’s compact 2.5-square-mile footprint, from the eastern neighborhoods near the Middle River to the western blocks along Andrews Avenue. Scheduling is coordinated from our South Florida office, with typical response for estimates within 48 hours.
- East Wilton Manors (Middle River waterfront)
- Central Wilton Manors (NE 26th Street corridor)
- West Wilton Manors (Andrews Avenue vicinity)
- Colohatchee Park area
- Island City (downtown core)
Service Area - Cities Near Wilton Manors

We serve Wilton Manors directly and coordinate projects across adjacent Broward County cities. Homeowners in Fort Lauderdale, FL, Oakland Park, FL, Lauderdale Lakes, FL, and Lauderhill, FL receive the same measured survey, written pricing, and documented photo record under the Haven Standard.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wilton Manors

Yes. Our phone is answered by a live person 24 hours a day, including weekends and holidays. We schedule estimates throughout the week based on your availability, not ours. For emergency board-up after storm damage, we dispatch as conditions allow.
Possibly. Some Wilton Manors neighborhoods have architectural review requirements for exterior changes. We provide the product data sheets, color samples, and Miami-Dade NOA documentation your HOA may require, and we adjust the installation schedule if approval timelines extend beyond our typical ordering window.
Broward County requires a building permit for all window and door replacements in Wilton Manors because the city is within the High Velocity Hurricane Zone. The permit application must include Florida Product Approval or Miami-Dade NOA numbers for every product. We pull the permit, schedule inspection, and handle the certificate of completion.
Call (754) 666-7478 to schedule your free estimate. Every job begins with a measured survey you keep, and the written price before any work starts is the price on the final invoice - Haven Clause 1, since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services

What Neighbors Say About Sightline Windows & Doors Fort Lauderdale
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.