New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Wilton Manors, FL | Sightline Windows & Doors Fort Lauderdale
Our Impact Windows & Doors - Wilton Manors services typically run $1,200-$2,800 per opening installed for CGI products, with jalousie-to-impact conversions on 1950s block homes landing at the higher end due to frame-out and stucco repair work. We’re an independent crew - not manufacturer-authorized - that has measured, ordered, and installed CGI glazing across Wilton Manors since before the current HVHZ rules tightened in 2012. Call (754) 666-7478 and we’ll bring a written price to your door before any work starts.
Why Wilton Manors Residents Choose Us for CGI Service
We know CGI products because we’ve lived with their failure modes. Sonia Raman, our owner, spent summers measuring openings for a Burbank glazing outfit before completing her building trades training at Los Angeles Trade-Technical College. She’s been ordering and installing impact-rated windows and doors across South Florida for the better part of two decades now, including a long stretch of CGI sliding door replacements along the Intracoastal Waterway corridor near Las Olas where salt air taught her exactly how fast an unsealed frame rots from the inside out.
That experience is why we carry CGI sales & service as one of eight manufacturer lines we specify by performance tier, not by what happens to be in a warehouse. Our technicians are background-checked, uniformed, and identified by license number before they arrive at your Wilton Manors home - Haven Clause 3, Verified Crews. The measured survey you keep and the written quote we provide are the same document; they cannot differ. Our 365-Day Done Right Promise is stamped on every job, not offered as a favor.
Measure it right the first time or measure it twice on someone else’s dime. That’s the operating principle Sightline was built on in 2012, and it’s why we still measure every rough opening twice before ordering a single CGI unit.
Before
AfterCommon CGI Windows & Doors Problems We Solve in Wilton Manors
- Weep-hole and sill-pan clogging from ficus and sea-grape litter. Wilton Manors’s mature privacy hedges shed debris straight onto window sills during storm season. CGI impact windows depend on clear weep holes and sloped sill pans to drain wind-driven rain. When ficus berries and sea-grape leaves pack those channels, water backs up into the jalousie-converted block opening and rots the buck from the inside. We clean, re-slope, and replace corroded pans with marine-grade aluminum.
- Roller and track corrosion on horizontal rollers and 3-panel sliders. The canal-grid air here, barely four miles from the Atlantic, carries enough salt to pit even CGI’s coastal-grade hardware. We see grinding rollers on three-year-old units that would last fifteen inland. We stock OEM CGI rollers where available and proven 316 stainless aftermarket replacements where they’re not.
- Failed glazing gaskets on older CGI double-hung impact inserts. The constant humidity cycling in Wilton Manors dries and cracks rubber gaskets faster than the manufacturer specs account for. Water intrusion at the sill clouds the glass between lites. We replace the gasket set and inspect the glazing cartridge; if the unit’s water-tracked the frame, we price both repair and full replacement so you see the honest numbers.
- Sagging casement or awning sashes at the hinge. Years of HVHZ wind-load cycling on 1960s CBS openings that were never reframed stress CGI hinge hardware beyond design limits. The sash drops, the weatherstrip gaps, and the lock points misalign. We re-square the frame or recommend a full-frame replacement with proper structural attachment to the block.
- Interior-mount frame gaps on tight-lot conversions. Wilton Manors’s zero-lot-line setbacks mean we often install CGI impact units from inside the home. Poorly executed inside-mount jobs leave visible frame edges and compromised weatherstripping compression. We finish with proper jamb extensions and exterior stucco patching that matches the existing texture.
CGI Service in Wilton Manors: What Local Conditions Mean for Your Equipment
Here’s the Wilton Manors reality that shapes every CGI job we price. The city’s narrow lots and zero-lot-line setbacks - often screened by mature ficus and sea-grape hedges that homeowners won’t cut back - make exterior scaffold or swing staging impractical on most properties. Nearly every CGI window swap on this street stock is done from the interior. That demands inside-mount impact frames with precise jamb depth, exterior stucco patching at the buck returns, and a crew that knows how to protect floors and furniture while maneuvering a 90-pound impact unit through a 32-inch hallway.
On a 1958 CBS ranch off NE 21st Court, our crew pulled original jalousie frames out of a front-facing wall and set CGI Sentinel impact single-hungs from the interior because the ficus hedge ran to the property line. We replaced the corroded aluminum sill pans, patched the stucco buck returns with matching texture, and left the homeowner with a shuttered-free, HVHZ-compliant opening. The homeowner told us it was the first time they could leave for a storm weekend without putting up panels.
That job is typical of Wilton Manors service area work. The jalousie-to-impact conversion is the defining job type here because the housing stock is overwhelmingly 1950s-1960s concrete-block ranch homes built with glass-louvered windows that offer zero hurricane resistance. Broward County’s High Velocity Hurricane Zone status means every replacement must carry a Miami-Dade NOA or HVHZ-specific Florida Product Approval - a stricter standard than most of Florida. We handle that paperwork on every job.
CGI Models & Products We Service in Wilton Manors
We work with the full CGI impact-rated product line that sees field use in Wilton Manors: the Sentinel Series impact windows for standard single-hung and horizontal-roller replacements; the Estate Series for larger openings and custom shapes; the Impact French and Entry Door systems for front-door conversions on CBS ranches; and the hurricane-rated Patio Door series for rear-wall sliders opening to pools and patios.
We source OEM CGI hardware and impact-glass cartridges whenever the glazing cartridge remains in production. When OEM stock is discontinued - common on units installed during the 2004-2006 post-hurricane boom - we use proven aftermarket stainless rollers and gaskets that meet or exceed the original spec. If a CGI unit has water-tracked the sill on a block opening, we always price a full-frame replacement against an insert swap so the homeowner can see the honest trade-off in writing before deciding.
CGI Service Pricing in Wilton Manors
| Service | Typical Range in Wilton Manors |
|---|---|
| CGI impact window insert replacement (standard opening) | $1,200 - $1,900 |
| CGI full-frame replacement with block frame-out and stucco repair | $2,100 - $2,800 |
| CGI sliding patio door roller and track service | $340 - $580 |
| CGI entry door hardware and weatherstrip replacement | $480 - $760 |
| Jalousie-to-CGI impact conversion (per opening, including stucco) | $2,400 - $3,200 |
| Measured survey and written estimate | No charge |
What drives cost: the condition of the existing block opening, whether the original jalousie frame requires cutting out, the extent of stucco repair needed after interior-mount installation, and whether the CGI unit must be custom-sized for a non-standard rough opening. Every estimate includes the measured survey you keep, a written scope with line-item pricing, and a documented photo record of the existing condition. Call (754) 666-7478 to schedule your free estimate for our Window Replacement in Wilton Manors - we’ll bring the written price to your home before any work starts.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Wilton Manors
Usually not without modification. The original jalousie openings in Wilton Manors’s 1950s-1960s CBS ranches are typically taller and narrower than modern impact-unit dimensions, and the concrete block returns are often uneven from decades of paint and caulk buildup. We measure the rough opening, the visible frame, and the masonry return separately, then price both a custom-sized CGI unit and the frame-out work required to achieve a plumb, square installation. Call (754) 666-7478 and we’ll survey your specific opening at no charge.
An insert can pass HVHZ only if the existing frame is structurally sound, properly flashed, and capable of transferring wind loads to the block. In Wilton Manors, we find that most jalousie-era frames fail at least one of those criteria due to corrosion or inadequate attachment. We always inspect and document the existing frame; if an insert is viable, we’ll price it. If not, we’ll show you the full-frame replacement cost in the same written estimate. Call (754) 666-7478 for an exact quote - estimates are free.
Yes. The salt-laden humidity in Wilton Manors’s canal-grid environment, four miles from the Atlantic, corrodes rollers and tracks faster than inland locations. Even CGI’s coastal-grade hardware shows pitting here within three to five years. We stock replacement rollers and can service most CGI sliding door systems same-visit. Grinding left unaddressed damages the track and eventually the sash alignment. Call (754) 666-7478 and we’ll inspect the mechanism and quote the repair in writing.
HVHZ requires Miami-Dade Notice of Acceptance or Florida Product Approval specific to high-velocity wind zones, which is stricter than the standard Florida Building Code. Every CGI unit we order for Wilton Manors carries the correct HVHZ documentation; we file it with the permit application and make it available for your insurance review. The product label, the NOA number, and the installation method must all align, or the inspection fails. We verify all three before ordering.
If the CGI unit is properly rated for HVHZ and installed with Miami-Dade-approved methods, yes - that is one of the primary reasons Wilton Manors homeowners convert from jalousie windows. The key is the documentation: the NOA, the installation compliance, and the passed inspection. We provide all three as standard on every job. Your insurer may require proof; we include it in the documentation packet you receive at completion. Call (754) 666-7478 to discuss whether your specific opening configuration qualifies.
Service Areas Near Wilton Manors
We carry CGI service in Oakland Park immediately to the north, where the same jalousie-era housing stock and HVHZ requirements apply. Our CGI service in Fort Lauderdale covers the broader Intracoastal corridor including Las Olas and the neighborhoods east of Federal Highway. We also work Lauderdale Lakes, Lauderhill, and North Lauderdale for homeowners seeking the same documented installation standard.
Book Your CGI Service in Wilton Manors Today
Call (754) 666-7478 to schedule your free measured survey. We’ll bring the written price, the HVHZ product-approval knowledge, and a crew that knows how to work inside your home when the hedges won’t let us set a ladder outside. Every job leaves with a documented photo record and our 365-Day Done Right Promise stamped on the paperwork.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Wilton Manors since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
