New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Windows & Doors in Oakland Park, FL | Sightline Windows & Doors Fort Lauderdale
Oakland Park Window Replacement for PGT products typically runs $180-$420 for hardware and seal repairs, while full-frame HVHZ-compliant replacements on older CBS homes start around $1,400-$2,800 per opening depending on size and permit scope. We’re independent PGT specialists - not manufacturer-authorized - which means we work on the actual units installed across Oakland Park, not just the current catalog. Call (754) 666-7478 to schedule your free measured survey; we’ll hand you a written price before any work starts.
Why Oakland Park Residents Choose Us for PGT Service
We’ve been measuring, ordering, and installing PGT impact-rated windows and doors across Broward County since 2012. Sonia Raman, our owner, spent her early years working summers with a glazing outfit in Burbank before completing her building trades training at Los Angeles Trade-Technical College. She brought that West Coast precision to South Florida and has spent the better part of two decades watching salt air destroy poorly sealed frames along the Intracoastal Waterway corridor. That experience shaped how we approach PGT sales & service in Oakland Park.
Our crews carry license numbers on their uniforms. Haven Clause 3 means the person at your door is the person on the record. We don’t do verbal assurances - the 365-Day Done Right Promise is stamped on every job, and every visit leaves a documented photo record. When we quote a PGT repair or replacement in Oakland Park, the measurement and the price are the same document. No change orders, no surprises.
We stock genuine PGT rollers, weatherstripping, sash locks, and glazing gaskets locally for fast turnaround. For obsolete parts, we specify precision aftermarket components and tell you straight when repair stops making sense and full replacement is the smarter path.
Before
AfterCommon PGT Windows & Doors Problems We Solve in Oakland Park
- Flat-spotted nylon rollers on PGT aluminum impact sliding doors. South Florida’s humidity and salt air harden the rollers until the panel drags or jumps the track. The glass and frame are still structurally sound; we replace the roller assembly with OEM or matched aftermarket parts and reseat the panel. Most Oakland Park homes with pool access or Florida rooms see this failure first.
- Failed weatherstripping at the sill and meeting rail on PGT WinGuard vinyl single-hungs. Oakland Park’s June-October rainy season delivers near-daily driving rain. When the compression seal degrades, wind pushes water past the meeting rail into the wall cavity. We replace the weatherstrip and check the sill slope - many pre-1975 CBS homes have near-zero slope that compounds the problem.
- Adhesion loss at aluminum frame corner sealants. On CBS homes throughout Oakland Park’s 1950s-1970s neighborhoods, the original stucco meets the frame with little to no sill slope. Water pools there, thermal cycles crack the sealant, and the bond fails. We remove the old sealant, prep the substrate, and reseal with a compatible marine-grade product rated for HVHZ exposure.
- Edge delamination or hazing in PGT impact glass laminates. West-facing windows in Oakland Park take full afternoon sun and daily thermal cycling. The interlayer degrades at the edge first, creating a foggy perimeter that spreads inward. This is not a repairable condition - the insulated glass unit must be replaced to maintain impact rating.
- Corroded hardware and misaligned sashes on original jalousie replacements. When we convert a jalousie opening to a PGT impact unit, the new frame must sit plumb in a rebuilt rough opening. Old jalousie frames were often shimmed into block with minimal fastening; we find stripped anchors and out-of-square openings regularly on Oakland Park service area jobs.
PGT Service in Oakland Park: What Local Conditions Mean for Your Equipment
Oakland Park sits inside Broward County’s High Velocity Hurricane Zone, where every Impact Windows & Doors - Oakland Park replacement - even a single unit - must carry Miami-Dade Notice of Acceptance approval and be installed by a licensed contractor pulling a permit. This is stricter than much of Florida, and it shapes every PGT job we do here. The city’s large inventory of post-war CBS ranch homes, many still fitted with original jalousie or thin aluminum-frame windows, cannot be incrementally “upgraded.” Those frames must come out entirely.
We were called to a 1962 CBS ranch off NE 6th Avenue in Oakland Park where the original jalousie windows on the Florida room had been leaking for years. After pulling the permit, our crew removed the jalousie frames, rebuilt the rough openings with new pan flashing and sill pans, and installed PGT WinGuard aluminum impact single-hungs sized to the original openings. The homeowner gained a fully HVHZ-compliant enclosure, and the inspection passed on the first try.
That job illustrates why “jalousie replacement” in Oakland Park always means a full rough-opening rebuild, not a glazing swap. Broward County inspectors will red-tag any attempt to leave the original frame in place. The near-zero sill slopes common in this era’s CBS construction mean water sits against the frame until it finds a path inside. A PGT impact unit installed without proper pan flashing and slope correction will fail prematurely no matter how good the product is.
Measure it right the first time or measure it twice on someone else’s dime.
PGT Models & Products We Service in Oakland Park
We work on the full range of PGT impact-rated and non-impact product lines found in Oakland Park homes:
- PGT WinGuard Aluminum Impact Series - the workhorse of Broward County HVHZ installations; we stock rollers, weatherstrip, and corner keys for common sizes
- PGT WinGuard Vinyl Impact Series - growing share of replacement jobs in Oakland Park for its thermal performance; we carry sash locks, balance systems, and meeting rail seals
- PGT Aluminum Series 7000 - non-impact architectural line; hardware and screen replacements available
- PGT Vinyl Series 8000 - energy-efficient non-impact; we source glazing gaskets and tilt-latch hardware
Our parts sourcing prioritizes genuine PGT components to preserve fit, finish, and warranty compatibility. For discontinued items, we specify aftermarket alternatives that meet or exceed original performance specs. We maintain local inventory for the most common PGT failure modes, which means most Oakland Park service calls don’t wait on shipping.
PGT Service Pricing in Oakland Park
These are the price ranges we see on actual Oakland Park jobs:
| Service Type | Typical Range |
|---|---|
| Roller, lock, or weatherstrip repair | $180 - $340 |
| Sealant replacement and frame reseal | $220 - $420 |
| Insulated glass unit replacement (impact-rated) | $680 - $1,200 |
| Single-unit full-frame replacement (standard size) | $1,400 - $2,200 |
| Single-unit full-frame replacement (oversized or custom) | $2,400 - $2,800+ |
| Jalousie-to-impact conversion with rough-opening rebuild | $2,200 - $3,400 |
What drives cost: unit size, impact rating requirement, whether the opening needs structural modification, and permit complexity. Jalousie conversions cost more because they include demolition, rough-opening rebuild with pan flashing, and stucco patch. Every estimate we provide in Oakland Park includes the measured survey you keep, a written scope, and a fixed price - Haven Clause 1 means the quote and the final invoice are the same document. Call (754) 666-7478 for your exact numbers; estimates are free.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Oakland Park
Yes, if the frame, hardware, and seals are sound, we can replace just the insulated glass unit (IGU) with a new impact-rated laminate that matches your existing NOA. The IGU is custom-ordered to your frame’s daylight opening and glazed in place. If the frame shows corrosion, corner separation, or failed adhesion, replacement is the only code-compliant path. Call (754) 666-7478 and we’ll assess which route makes sense - estimates are free.
Most sticking PGT aluminum impact sliders are repairable. The nylon rollers flat-spot or seize from humidity and salt exposure; we replace the roller carriage, clean the track, and reseat the panel. If the frame itself is racked from foundation settlement or the track is worn through, we’ll tell you honestly and quote replacement. Call (754) 666-7478 to schedule a look - estimates are free.
Yes. Oakland Park is in Broward County’s HVHZ, and every window or door replacement must be performed by a licensed contractor under a pulled permit. The product must carry Miami-Dade NOA approval. We handle permit application, scheduling, and inspection coordination as standard on every Oakland Park job; the permit cost is itemized in your written quote, not hidden.
Corner water intrusion on PGT WinGuard vinyl units usually means failed weatherstripping at the sill or meeting rail, combined with wind pressure forcing water past the seal. On Oakland Park’s older CBS homes, near-zero sill slopes make this worse by letting water pool instead of drain. We replace the compression seal, verify sash alignment, and correct drainage path where possible. If the frame corners themselves have separated, the unit needs replacement. Call (754) 666-7478 - we’ll diagnose and quote in writing.
We can match PGT frame profiles, finishes, and glazing specifications from current and recently discontinued lines. For older units no longer in production, we specify the closest available PGT model that maintains visual consistency and HVHZ compliance. We always verify sightline dimensions and mullion spacing against your existing openings before ordering. Call (754) 666-7478 and bring your original paperwork if you have it - estimates are free.
Service Areas Near Oakland Park
We run PGT service calls daily across central Broward County. Our regular routes include PGT service in Fort Lauderdale to the south, PGT service in Wilton Manors to the west, plus Lauderdale Lakes, Lauderhill, and North Lauderdale. All the same Haven Standard guarantees apply: written price before work, verified crews, documented photo record, 365-Day Done Right Promise.
Book Your PGT Service in Oakland Park Today
Call (754) 666-7478 to schedule your free measured survey. We’ll hand you a written price before any work starts, pull the permit, and leave you with a documented photo record and the 365-Day Done Right Promise. Live person answers, day or night.
Written by Sonia Raman, Owner at Sightline Windows & Doors Fort Lauderdale, serving Oakland Park since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
