New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Fort Lauderdale Homeowners Choose PGT Windows & Doors
We provide independent PGT in Fort Lauderdale windows and doors service, repairing and replacing WinGuard and aluminum series units with PGT-specific parts and warranty-safe practices. Our shop stocks the glazing beads, rollers, and hurricane-rated hardware these systems require, and every job starts with a measured survey you keep and a written price that doesn’t change. Call (754) 666-7478 to schedule your free estimate.
PGT has been a dominant name in Florida impact-rated fenestration since the post-Hurricane Andrew code changes of the mid-1990s, and their WinGuard line remains one of the most installed impact window and door systems in Broward County. In Fort Lauderdale, where the High Velocity Hurricane Zone applies to every replacement, PGT’s Miami-Dade NOA-backed products are a common sight in mid-century CBS homes from Coral Ridge to Imperial Point, as well as in newer construction from Harbor Beach to Lauderdale-by-the-Sea. We’re not authorized by PGT - we’re an independent service provider that works on these units daily. That distinction matters because it means we evaluate each opening on its merits, not on a manufacturer’s sales target.
The salt air here is relentless. Fort Lauderdale’s 165-plus miles of canals push corrosive moisture deep into neighborhoods that never see the ocean, and we’ve found PGT hardware degrading three to five years faster than the manufacturer specs suggest for inland climates. That’s not a flaw in the product; it’s a local condition that demands local expertise.
Why Trust Sightline Windows & Doors Fort Lauderdale for Your PGT Windows & Doors?

Our technicians measure, order, and install our Window Installation services for PGT products weekly. Sonia Raman, who founded Sightline in 2012 after nearly two decades of hands-on work across South Florida, built this operation around a principle she learned measuring openings in Burbank: “Measure it right the first time or measure it twice on someone else’s dime.” That same precision applies to PGT service. We don’t guess at part numbers or substitute generic hardware that might compromise an impact rating.
Every technician is background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. We carry PGT-compatible glazing beads in the specific profiles these frames require, along with replacement rollers sized for WinGuard horizontal rollers and sliding glass doors, and multi-point lock keepers that maintain the hurricane-rated integrity of the original installation. When we source aftermarket parts, we verify they meet or exceed the original specifications; when OEM is the only safe choice, we say so.
Our documented photo record, standard on every job, captures frame condition, part numbers, and final test results. The 365-Day Done Right Promise covers all PGT work, and the written scope you receive before any tool is lifted is the same document that governs the final invoice - Haven Clause 1, Have it in writing. No change orders. No surprises.
Before
AfterCommon PGT Windows & Doors Problems We Fix in Fort Lauderdale
- Vinyl sash and frame corners cracking or bowing. PGT WinGuard Vinyl units in Fort Lauderdale take a beating from UV exposure and daily heat cycling. The vinyl expands and contracts; after eight to twelve years, stress cracks appear at the welded corners, or the frame bows enough that the sash won’t seat properly. Air and water infiltration follow, and the impact latch may not engage fully. We see this most often in west-facing units in neighborhoods like Melrose Manors and Riverland Village, where afternoon sun is direct and prolonged. Repair depends on crack severity and whether the frame geometry still allows proper sash alignment.
- Impact laminated glass seal failure. Older PGT WinGuard IG (insulated glass) units develop fog or haze between the panes when the edge seal degrades. In Fort Lauderdale, salt air accelerates this. The unit loses its thermal performance first, then the aesthetic clarity. We can replace the glass pack in many cases without touching the frame, preserving the original impact rating and NOA compliance. We verify the replacement glass carries the same Miami-Dade NOA number as the original.
- Horizontal roller and sliding glass door track corrosion and debris loading. PGT’s horizontal roller windows and sliding glass doors rely on stainless or nylon rollers running in aluminum tracks. Wind-driven sand and organic debris grind into the track profile; salt air corrodes the roller axles. The result is binding, flat-spotted rollers, and eventually frame stress from the homeowner forcing the panel. A Rio Vista homeowner called us about a 12-year-old PGT WinGuard horizontal roller that wouldn’t latch and whistled during a storm. We found the rollers had flat-spotted and the keeper was misaligned from frame movement, so we replaced the rollers, realigned the multi-point keeper, and re-sealed the sill - the unit passed a water test and locked smoothly without a full replacement.
- Hurricane-rated multi-point lock and keeper hardware loosening or misaligning. PGT impact units depend on multi-point locking systems that engage at several points along the frame. Salt air corrodes the keepers and causes screw back-out; repeated cycling wears the cam mechanisms. The door or window may appear closed but not fully secured, which fails the wind mitigation inspection and voids the insurance discount. We stock PGT-specific keeper profiles and can realign the entire lock system to factory engagement points.
- Weatherstrip degradation and sill seal failure. The compression seals and sill dams on PGT units harden and shrink in Fort Lauderdale’s heat. Water intrusion during driving rain - common in our summer thunderstorms - indicates the seal system has reached end of life. We replace with PGT-compatible weatherstrip rated for the same compression cycle count, not generic bulb seal that looks similar but performs differently under sustained wind pressure.
PGT Parts & Our Repair-vs-Replace Approach

We source PGT-specific OEM and OEM-equivalent glazing beads, rollers, lock keepers, and weatherstrip to keep impact ratings intact. Our Fort Lauderdale shop stocks the most common PGT horizontal roller wheel assemblies, WinGuard sash locks, and sliding door tandem rollers for same-day or next-day turnaround on standard repairs.
For older units with cracked frames or failed laminated glass, we give a straight repair-vs-replace assessment. The decision hinges on two factors: whether the opening still meets current HVHZ code, and whether PGT still manufactures the parts. Some pre-2010 PGT aluminum series are no longer in production; if the frame is structurally compromised and parts are obsolete, replacement is the honest recommendation. If the frame is sound and the failure is isolated to glass, hardware, or seal, repair is usually viable and more economical. We’ll show you the frame readings and explain which path preserves your Miami-Dade NOA compliance. Call (754) 666-7478 and we’ll review your unit in person - estimates are free.
Our PGT Service Process - Step by Step
- 1
Diagnosis with measured survey. We document the opening dimensions, frame condition, product label information (series, date code, NOA number), and failure symptoms. You receive a copy of this survey. For PGT units, we specifically check for frame squareness, sash corner weld integrity, and hardware engagement depth.
- 2
Written scope and price. Haven Clause 1: the quote derives directly from the measured survey and cannot differ from it. We specify PGT part numbers or compatible equivalents, labor hours, and any code-related considerations for Fort Lauderdale’s HVHZ requirements.
- 3
Repair or install with documented evidence. Verified crews arrive on schedule with identified license numbers. We photograph pre-condition, part installation, and post-repair test results. For impact units, we verify latch engagement and perform a water spray test where applicable.
- 4
Warranty and record delivery. The 365-Day Done Right Promise applies. You receive the photo record, the final invoice matching the written scope, and documentation of any Miami-Dade NOA numbers relevant to the work.
PGT Products We Service & Install in Fort Lauderdale

We work on the full PGT residential line: WinGuard Aluminum Impact Windows (single-hung, horizontal roller, and casement configurations); WinGuard Vinyl Impact Windows (single-hung and horizontal roller, common in 2005-2018 construction); PGT Aluminum Series (both impact-rated and non-impact units in older Fort Lauderdale homes); and PGT Vinyl Series single-hung, horizontal roller, and sliding glass door units. We stock replacement glass packs for WinGuard IG units, horizontal roller wheel assemblies, sliding door tandem rollers, multi-point lock keepers, and the specific glazing bead profiles these frames require. For new installation, we specify by opening performance requirements and your price range, not by what’s in our warehouse.
We Also Service These Brands
Our multi-line capability means we evaluate the opening first, then specify the product. We also service and install CGI, CWS, ES Windows, and ECO Window Systems, along with Therma-Tru entry systems and ViewLux architectural units. If your PGT Windows & Doors in Wilton Manors, FL neighbors or Fort Lauderdale home has mixed brands from previous renovations, we can maintain consistency or upgrade performance without limiting you to a single manufacturer.
FAQs - PGT Windows & Doors Service in Fort Lauderdale

Is Sightline Windows & Doors Fort Lauderdale authorized by PGT? No. We are an independent service provider with no affiliation or authorization from PGT. We service PGT products based on field experience and technical knowledge, not manufacturer endorsement. This independence allows us to recommend repair when it makes sense and replacement only when necessary.
My PGT WinGuard impact window is foggy between the panes - can you fix the glass without replacing the whole window? Yes, in most cases. Fogging indicates insulated glass seal failure. We can replace the glass pack with a new laminated impact unit that carries the same Miami-Dade NOA, preserving the frame and its code compliance. Call (754) 666-7478 for an exact quote - estimates are free.
Do you carry PGT-specific rollers and lock hardware for sliding glass doors? Yes. We stock PGT-compatible tandem rollers, single-wheel horizontal roller assemblies, and multi-point lock keepers for WinGuard and aluminum series sliding units. Generic hardware often fails to maintain the precise engagement depth these systems require for impact rating.
Can you service older PGT aluminum impact windows that are no longer in production? Often, yes. We evaluate whether the frame is structurally sound and whether we can source compatible parts. Some discontinued series have cross-compatible hardware with current PGT lines; others require custom fabrication or full replacement. We’ll show you the frame condition and explain the options.
Will repairing my PGT impact window void the original impact rating or NOA? Not if the repair uses equivalent or OEM-specified components and maintains the original frame and glazing configuration. We document all part specifications and NOA numbers so your wind mitigation inspection remains valid. Altering the frame profile or substituting non-rated glass would compromise the rating; we don’t do that.
How do I know if my PGT window needs repair or full replacement? Repair is viable when the frame is square, corners are intact, and the failure is isolated to glass, hardware, or seals. Replacement is necessary when the frame is cracked or bowed beyond realignment, parts are obsolete, or the unit no longer meets current HVHZ code for your Fort Lauderdale location. We make this assessment on site with the measured survey and explain the numbers. Call (754) 666-7478 to schedule - estimates are free.
Book Your PGT Service in Fort Lauderdale, FL
Call (754) 666-7478 to schedule your free estimate. A live person answers, 24/7. We’ll measure your opening, identify your PGT series and failure mode, and give you a written price before any work starts. Every job leaves a documented photo record and carries the 365-Day Done Right Promise.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Fort Lauderdale since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale

Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale
