New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Pembroke Park, FL
Window installation in Pembroke Park typically runs $650-$1,400 per opening for impact-rated units, with most full-home retrofits on the town’s 1,200-square-foot CBS homes landing between $8,500 and $18,000. Every job here starts with a measured survey you keep, and the written quote matches that document exactly - Haven Clause 1. Call (754) 666-7478 to schedule your free estimate.
Pembroke Park’s housing stock - built almost entirely in the 1960s and 1970s - presents a specific challenge: original jalousie and single-pane aluminum sliders that must be replaced with HVHZ-rated impact units under Broward County code. Our crews have handled window installation across thousands of similar retrofits, and we document every opening with photos before, during, and after the set.
Why Pembroke Park Homes Are Different
Pembroke Park was incorporated in 1957 and filled out through the 1970s with small concrete block stucco homes, almost all under 1,200 square feet. The original windows were jalousie louvers or early aluminum single-pane sliders, installed directly into masonry openings with minimal or nonexistent framing bucks. After 60-plus years of South Florida humidity and salt air, those bucks - where they exist - are often rotted wood or corroded steel.
Sitting 3-4 miles from the Atlantic in Broward County’s High-Velocity Hurricane Zone, Pembroke Park properties face salt-laden air that corrodes aluminum frames and steel hardware aggressively. The HVHZ designation legally requires every replacement window and exterior door to carry a Miami-Dade Notice of Acceptance or Florida Product Approval. Non-impact products are not permitted, even for interior-facing garage doors that penetrate the building envelope. This means virtually every window job in Pembroke Park is a full impact-rated retrofit with structural buck modification, not a simple swap.
Locals in the trade know that demo day frequently reveals no true buck at all - just louvered frames pinned into the block. That turns a quoted two-day job into a four-day one, with full pressure-treated buck installs required before any impact unit can be permitted and set.
Before
AfterOur Main Pembroke Park Services
These are the two services Pembroke Park homeowners call about most, plus sliding and patio door work for the town’s compact floor plans.
Window Replacement in Pembroke Park
Full-frame window replacement in Pembroke Park means removing jalousie or early aluminum units, installing pressure-treated bucks where needed, and setting HVHZ-rated impact frames with proper flashing integration into the CBS wall. We measure every opening to the sixteenth, note buck condition in writing, and deliver the same document as your fixed quote. Window Replacement in Pembroke Park is documented with a full photo record under Haven Clause 4.
Impact Windows & Doors in Pembroke Park
Every impact window and door we install in Pembroke Park carries a Miami-Dade NOA or Florida Product Approval, required by the HVHZ designation. We specify PGT, CGI, CWS, and ES Windows by performance tier and price range, matching the product to the opening’s exposure and your budget. The measured survey notes wind-load requirements for each elevation. Impact Windows & Doors in Pembroke Park includes the 365-Day Done Right Promise on every job.
Sliding & Patio Doors in Pembroke Park
Pembroke Park’s small homes often have single sliding patio doors opening to compact rear yards or side passages. We replace these with impact-rated multi-slide or standard sliders from PGT, CGI, or ViewLux, sized to the existing rough opening or expanded where structurally feasible. Buck replacement and sill pan integration are standard on every job. Sliding & Patio Doors in Pembroke Park starts with the same measured survey you keep as your price document.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Pembroke Park
Window installation in Pembroke Park means working with 50-60-year-old CBS construction where original jalousie windows were often pinned directly into masonry with no proper buck, and salt air has corroded what little metal framing existed. Our measured survey identifies buck condition, rough opening dimensions, and wind-load exposure before we specify PGT, CGI, CWS, or ES Windows impact units that meet HVHZ requirements. Window Installation under the Haven Standard means the quote document and the measurement are the same paper.
Single & Double Hung Windows
Signs you need it
Original jalousie windows that no longer seal, single-pane aluminum hung units with corroded balances, or any window that failed inspection under Broward’s HVHZ retrofit requirements.
What it costs in Pembroke Park
Single and double hung impact window installation in Pembroke Park typically ranges $680-$1,250 per opening, with full-home retrofits on 8-12 window homes running $8,500-$16,000 depending on buck replacement scope.
How we do it
We remove the existing unit, inspect and replace the buck with pressure-treated framing if needed, install the impact-rated hung window with integrated nailing fin, flash with self-adhered membrane, and document with before-and-after photos.
Horizontal Roller Windows
Signs you need it
Sticky rollers on original aluminum sliders, visible frame corrosion from salt air, or failed impact ratings on existing non-HVHZ units that must be brought to code.
What it costs in Pembroke Park
Horizontal roller impact windows in Pembroke Park run $720-$1,350 per opening, with wider two-panel units at the higher end and standard bedroom sizes toward the lower.
How we do it
We demo the existing slider, rebuild or install the buck, set the new impact-rated roller unit with proper sill pan and head flashing, test operation, and deliver the photo record and written warranty.
What Window Installation Costs in Pembroke Park
| Item | Typical range in Pembroke Park |
|---|---|
| Single/double hung impact window | $680 - $1,250 |
| Horizontal roller impact window | $720 - $1,350 |
| Full-home retrofit (8-12 windows, with buck work) | $8,500 - $18,000 |
How long does window installation take in Pembroke Park?
Most Pembroke Park window installations take 2-4 days, with the longer timeline when we find no true buck behind original jalousie units and must install pressure-treated framing before setting impact-rated windows. Call (754) 666-7478 for a measured survey and fixed timeline.
Do you pull permits for window installation in Pembroke Park?
Yes - Broward County requires permits for all window replacements in the HVHZ, and we pull and close them as standard scope, with inspections passed before final invoice. Call (754) 666-7478 to schedule your free estimate.
Door Installation in Pembroke Park
Door installation in Pembroke Park faces the same 60-year-old CBS construction challenges as window work: corroded steel frames, minimal or missing bucks, and the HVHZ mandate that every exterior door carry Miami-Dade NOA or Florida Product Approval. Entry doors here often mean cutting back stucco to install proper pressure-treated bucks before any impact-rated slab or frame can be set. Door Installation under the Haven Standard includes the measured survey, written price, and documented photo record on every visit.
Entry Doors
Signs you need it
Corroded steel door frame, daylight visible around the jamb, or a non-impact-rated entry door that cannot pass Broward County HVHZ retrofit requirements.
What it costs in Pembroke Park
Impact-rated entry door installation in Pembroke Park typically runs $1,800-$3,500 including frame, hardware, and buck modification if needed.
How we do it
We remove the existing door and frame, inspect and rebuild the buck with pressure-treated lumber, install the impact-rated pre-hung unit with proper flashing, and document the work with photos.
Hurricane-Proof Front & Entry Doors
Signs you need it
Existing front door lacks Miami-Dade NOA, shows frame separation from the CBS wall, or the glass lite is not impact-rated laminated glazing.
What it costs in Pembroke Park
Hurricane-proof front door systems in Pembroke Park range $2,200-$4,500 depending on decorative glass options, sidelight configuration, and buck replacement scope.
How we do it
We specify Therma-Tru or PGT impact-rated entry systems with laminated glass lites, install with integrated frame anchors into rebuilt or verified bucks, and seal with self-adhered flashing tape before stucco repair.
What Door Installation Costs in Pembroke Park
| Item | Typical range in Pembroke Park |
|---|---|
| Standard impact entry door (with buck work) | $1,800 - $3,500 |
| Hurricane-proof front door with decorative glass | $2,200 - $4,500 |
| French/double door impact replacement | $3,500 - $6,500 |
Can you match my existing stucco after door installation?
Yes - stucco repair and color matching around the new frame are standard scope on every Pembroke Park door installation, documented in the measured survey and included in the fixed written price. Call (754) 666-7478 for your free estimate.
Do I need a new buck for my entry door replacement?
In Pembroke Park, we find corroded or missing bucks on roughly 70% of 1960s-70s entry door removals; we inspect and quote buck replacement in the initial measured survey so the price does not change. Call (754) 666-7478 to schedule.
Energy-Efficient Windows in Pembroke Park
Energy-efficient windows in Pembroke Park must first meet HVHZ impact requirements, then optimize for thermal performance in a climate where air conditioning runs 10-11 months annually. The original single-pane jalousie and early aluminum sliders in this 1960s-70s housing stock have essentially no insulating value and leak conditioned air continuously. Energy-Efficient Windows from Sightline pair Miami-Dade NOA-rated impact frames with low-E and argon-filled glazing to cut solar heat gain and utility load.
Low-E & Argon Gas Glass
Signs you need it
Rooms that overheat by mid-morning despite closed blinds, or utility bills that spike in summer with no thermostat change, indicating high solar heat gain through single-pane glass.
What it costs in Pembroke Park
Low-E and argon gas upgrade on impact windows in Pembroke Park adds $80-$150 per opening to the base impact unit price, with whole-home upgrades typically $1,200-$2,400 additional.
How we do it
We specify PGT or CWS impact units with low-E coatings and argon fill, verify U-factor and SHGC ratings on the specification sheet you receive, and install with the same buck and flashing protocol as standard impact work.
ENERGY STAR Replacement Windows
Signs you need it
Existing windows pre-date ENERGY STAR criteria, or you are seeking utility rebate qualification through Broward County or FPL programs that require certified performance.
What it costs in Pembroke Park
ENERGY STAR certified impact replacement windows in Pembroke Park run $750-$1,450 per opening, with certification documentation provided for rebate applications.
How we do it
We select from ES Windows or ECO Window Systems lines that carry both Miami-Dade NOA and ENERGY STAR certification, install to NFRC standards, and provide the performance documentation package with your invoice.
What Energy-Efficient Windows Costs in Pembroke Park
| Item | Typical range in Pembroke Park |
|---|---|
| Low-E/argon upgrade (per opening) | $80 - $150 add-on |
| ENERGY STAR impact replacement window | $750 - $1,450 |
| Whole-home low-E upgrade (10-12 windows) | $1,200 - $2,400 add-on |
Will energy-efficient windows lower my electric bill in Pembroke Park?
Most Pembroke Park homeowners see 15-25% summer cooling load reduction after replacing single-pane jalousie or early aluminum units with low-E argon impact windows, though results vary with home orientation and insulation. Call (754) 666-7478 for a measured survey and performance estimate.
Do energy-efficient windows still meet hurricane code in Pembroke Park?
Yes - every energy-efficient window we install in Pembroke Park carries Miami-Dade NOA or Florida Product Approval as the baseline requirement; thermal performance upgrades are added to HVHZ-rated frames, not substituted for them. Call (754) 666-7478 for specifications.
Impact Garage Doors in Pembroke Park
Impact garage doors in Pembroke Park face a specific code interpretation: even interior-facing garage doors that penetrate the building envelope must carry HVHZ ratings under Broward County’s strict reading of the Florida Building Code. The town’s small CBS homes often have single-car garages with original non-rated doors that fail this standard. Impact Garage Doors from Sightline include wind-load-rated panels, reinforced tracks, and proper buck integration documented in the measured survey.
Hurricane-Rated Garage Doors
Signs you need it
Existing garage door lacks Miami-Dade NOA, shows panel bowing or track misalignment, or was installed before Broward County began enforcing HVHZ ratings on garage envelope penetrations.
What it costs in Pembroke Park
Hurricane-rated garage door installation in Pembroke Park typically runs $1,600-$3,200 for single-car openings, with wind-load ratings from Mr-Glass or PGT specified to the opening’s exposure.
How we do it
We remove the existing door and track, inspect the header and jambs for structural integrity, install reinforced wind-load-rated tracks and impact-rated panels, and test cycle operation before documenting with photos.
Wind-Load Code Compliance
Signs you need it
Permit application for window or door work flagged the garage door as non-compliant, or insurance inspection noted a non-rated garage envelope penetration in the HVHZ.
What it costs in Pembroke Park
Wind-load code compliance upgrades for existing garage doors in Pembroke Park range $900-$2,100 depending on whether the existing track can be reinforced or full replacement is required.
How we do it
We assess the existing door and track against current wind-load tables, specify reinforcement or replacement to meet the specific pressure rating for Pembroke Park’s HVHZ zone, and pull permits with engineered documentation.
What Impact Garage Doors Costs in Pembroke Park
| Item | Typical range in Pembroke Park |
|---|---|
| Hurricane-rated garage door (single car) | $1,600 - $3,200 |
| Wind-load compliance upgrade (track reinforcement) | $900 - $2,100 |
| Full replacement with automatic opener | $2,400 - $4,500 |
Does my garage door need to be impact-rated if it faces my backyard?
Yes - Broward County’s HVHZ enforcement applies to any garage door that penetrates the building envelope, regardless of orientation; we verify the specific wind-load rating required for your exposure during the measured survey. Call (754) 666-7478 for your free estimate.
Can you reinforce my existing garage door or does it need full replacement?
Some Pembroke Park garage doors can be brought to wind-load compliance with reinforced tracks and hardware; others require full replacement - we document which path applies in your measured survey with a fixed price for either scope. Call (754) 666-7478 to schedule.
Custom & Geometric Windows in Pembroke Park
Custom and geometric windows in Pembroke Park present a particular challenge: the town’s 1960s-70s CBS homes were built with standardized rectangular openings, and any shaped or oversized unit requires structural modification of the masonry envelope. Arched or circular windows that appear in newer construction are almost always additions here, not original features. Custom & Geometric Windows from Sightline include engineered header specifications and permit drawings as standard scope.
Geometric & Shaped Windows
Signs you need it
Remodeling plans call for a circular, triangular, or trapezoidal window in a CBS wall that currently has only rectangular openings, requiring structural header redesign.
What it costs in Pembroke Park
Geometric shaped impact windows in Pembroke Park typically run $1,400-$3,200 per opening, with structural header modification and permit engineering adding $800-$1,500 depending on wall location.
How we do it
We produce measured drawings for the shaped unit, engage a structural engineer for header calculations required by Broward County, install the custom impact-rated frame with integrated flashing, and document the structural and finish work with photos.
Oversized Openings
Signs you need it
Opening two or more standard window bays into a single picture window or multi-panel slider, requiring removal of intermediate CBS piers and engineered header replacement.
What it costs in Pembroke Park
Oversized impact window installations in Pembroke Park range $3,500-$8,500 depending on span, header engineering complexity, and whether intermediate block piers must be removed and re-supported.
How we do it
We survey the existing structure, produce engineered drawings for header and pier modification, pull structural permits, install temporary support, remove and replace masonry as specified, and set the oversized impact unit with continuous sill pan and head flashing.
What Custom & Geometric Windows Costs in Pembroke Park
| Item | Typical range in Pembroke Park |
|---|---|
| Geometric shaped window (with structural) | $1,400 - $3,200 |
| Oversized opening (multi-bay conversion) | $3,500 - $8,500 |
| Custom arched window (engineered header) | $2,200 - $4,800 |
Do I need an engineer for a custom window in Pembroke Park?
Yes - Broward County requires engineered structural drawings for any modification to CBS load-bearing walls, including new shaped or oversized openings; we include this in scope and coordinate the engineer as standard. Call (754) 666-7478 for a measured survey and fixed price.
How long does a custom window installation take compared to standard?
Custom and geometric window installations in Pembroke Park typically take 3-5 days versus 1-2 days for standard retrofits, with additional time for structural work, permit approval, and specialized flashing details. Call (754) 666-7478 for your specific timeline and written estimate.
Brands We Service in Pembroke Park
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - matched to the opening’s performance requirements and your budget, not our inventory. For Pembroke Park’s HVHZ retrofit work, we frequently draw on CWS and ES Windows for mid-tier impact performance and ECO Window Systems for energy-efficient upgrades, with parts and warranty support coordinated from our Miami office. See our brands for full specifications.
Pricing for Windows & Doors in Pembroke Park, FL
| Service | Typical range in Pembroke Park |
|---|---|
| Single/double hung impact window | $680 - $1,250 |
| Horizontal roller impact window | $720 - $1,350 |
| Full-home window retrofit (8-12 windows) | $8,500 - $18,000 |
| Impact entry door (with buck work) | $1,800 - $3,500 |
| Hurricane-proof front door with glass | $2,200 - $4,500 |
| Low-E/argon energy upgrade (per opening) | $80 - $150 add-on |
| ENERGY STAR impact window | $750 - $1,450 |
| Hurricane-rated garage door (single car) | $1,600 - $3,200 |
| Wind-load garage door compliance upgrade | $900 - $2,100 |
| Geometric shaped window (with structural) | $1,400 - $3,200 |
| Oversized opening conversion | $3,500 - $8,500 |
Prices in Pembroke Park increase when we find no true buck behind original jalousie units, requiring pressure-treated framing installation before any impact unit can be set. The price we write before work starts is the price on the final invoice - Haven Clause 1, no exceptions.
Neighborhoods We Serve in Pembroke Park
We serve the full town of Pembroke Park, from the original 1950s-60s core near the town center to the duplex and small single-family blocks that filled out through the 1970s. Dispatch and scheduling are coordinated from our Miami office; crews are typically on-site in Pembroke Park within standard South Florida response windows.
- Pembroke Park core (original 1950s-60s single-family)
- East Pembroke Park duplex district
- West Hollywood adjacent blocks
- Carver Ranches border area
- Miramar Parkway corridor
Service Area - Cities Near Pembroke Park
Our crews work throughout Broward County and adjacent Miami-Dade municipalities, with Fort Lauderdale, FL and Wilton Manors, FL to the north, Oakland Park, FL to the northeast, and Lauderdale Lakes, FL to the northwest all within standard service range from our Miami coordination office.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Pembroke Park
We schedule measured surveys in Pembroke Park within standard South Florida lead times, with live phone coverage 24/7 for booking; most Pembroke Park homeowners receive their written quote within 48 hours of the survey, and installation is scheduled once permits are approved.
Pembroke Park has minimal HOA coverage compared to newer Broward developments, but any applicable HOA architectural review is your responsibility to initiate; we provide product data sheets, Miami-Dade NOA documentation, and color samples to support your application at no charge.
Broward County requires building permits for all window and door replacements in the HVHZ, with Miami-Dade NOA or Florida Product Approval documentation submitted with the application; we pull permits, schedule inspections, and close them out as standard scope on every job.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pembroke Park Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.