New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
How Much Does Impact Window Installation Cost in Fort Lauderdale?
Impact window installation in Fort Lauderdale typically costs between $850 and $2,800 per window, all-in, covering product, labor, permits, and disposal. Most homeowners replacing 8 to 12 windows on a standard single-story house land somewhere between $9,500 and $22,000 for the full project. The spread is wide because frame material, glass configuration, opening size, and the product line you specify all move the number – but the ranges on this page reflect what we actually see in the Fort Lauderdale market in 2026, not a national average padded with caveats.
Impact Window Installation Cost Breakdown (2026)
Impact window installation in Fort Lauderdale typically costs between $850 and $2,800 per window installed. That number includes the window unit itself, labor, permit fees, and haul-away of your old frames. Below is a line-item view of how that total builds.
| Cost Component | Typical Range (Fort Lauderdale, 2026) | Notes |
|---|---|---|
| Impact window unit (product only) | $400 - $1,800 per window | Single-hung aluminum at the low end; large casement or picture window in premium laminated glass at the high end |
| Installation labor | $150 - $400 per window | Retrofit/pocket installs cost less than full-frame tear-outs; second-story or high-rise units cost more |
| Broward County building permit | $75 - $350 per project | Required for every impact window installation in Fort Lauderdale; fee scales with project valuation |
| Inspection fee (city or county) | $50 - $150 | Typically bundled into the permit process; some Fort Lauderdale municipalities charge separately |
| Old window removal and disposal | $30 - $80 per window | Aluminum frames recycled; vinyl and laminated glass require separate disposal |
| Stucco or drywall repair | $100 - $600 per opening | Full-frame replacements almost always disturb the surrounding surface; retrofit installs rarely do |
| Upgraded glazing (low-E, laminated) | $50 - $300 per window add-on | Low-E coatings improve SHGC rating and reduce cooling load in Fort Lauderdale’s climate |
Project-Level Cost Estimates by House Size
- Small condo or townhouse (4 - 6 windows): $4,000 - $10,500
- Average single-family home in Fort Lauderdale (8 - 12 windows): $9,500 - $22,000
- Larger home in Coral Ridge, Rio Vista, or Las Olas Isles (14 - 20 windows): $16,000 - $38,000
- Whole-house replacement with entry and sliding glass doors added: $22,000 - $55,000+
Those project ranges assume a standard two-story or single-story residential structure. High-rise condos in downtown Fort Lauderdale or Victoria Park add a staging and access premium that can push labor 20 to 35 percent above the figures above. On the other hand, a straightforward retrofit on a 1960s CBS (concrete block structure) home in Riverside Park – the kind of project we see often – comes in toward the middle of those ranges because the openings are square, the frames are clean, and there’s no second-story lift required.
Product Line Price Tiers
Not every window is priced the same, and the manufacturer you choose has a real effect on your number. Here’s where the eight lines we carry tend to land in the Fort Lauderdale market:
- Entry tier ($400 - $700/unit): ES Windows, ECO Window Systems – aluminum single-hung and sliding units that meet Florida Building Code impact requirements at the lowest product cost. Good choice for rental properties or budget-constrained full-house replacements.
- Mid tier ($600 - $1,100/unit): PGT, CWS – the most common specification in Fort Lauderdale’s residential market. PGT’s WinGuard line is what most homeowners in Tarpon River and Sailboat Bend are installing right now. Solid impact ratings, available in multiple frame colors, and well-supported by local inspectors who see them constantly.
- Performance tier ($900 - $1,500/unit): CGI, Mr-Glass – heavier frames, tighter tolerances, better SHGC and U-factor numbers, and longer documented track records in Category 5 wind events. Common in higher-value homes in Harbor Beach and Lauderdale Isles.
- Premium and custom tier ($1,200 - $1,800+/unit): ViewLux, specialty configurations through CGI and PGT – large-format picture windows, architectural shapes, custom colors. These units can take 8 to 14 weeks to fabricate; lead time is part of the cost conversation.
At Sightline, the product specification happens during the measured survey – not afterward. The written price you receive before any work starts reflects the exact unit, the exact opening dimensions, and the exact labor scope. That’s Haven Clause 1 in practice: the measurement and the quote are the same document.
Before
AfterWhat Affects Impact Window Installation Pricing in Fort Lauderdale
Six factors consistently move the price up or down in the Fort Lauderdale market. Some are obvious; a few are specific to South Florida’s building environment and worth understanding before you finalize a scope.
- Window size and configuration: A 3-foot-by-4-foot single-hung in a bedroom costs significantly less than a 6-foot-by-5-foot horizontal roller in a living room facing the Intracoastal. Larger glass area means more laminate, heavier frames, and more labor to set and seal. Custom shapes – trapezoids, octagons, arched transoms – require fabricated units that can’t be pulled from a manufacturer’s standard run, which adds both cost and lead time.
- Frame material: Aluminum frames dominate Fort Lauderdale’s market for good reason – they hold up against salt air from the Atlantic and Biscayne Bay without corroding the way wood or untreated steel do. Aluminum is also the standard Florida Building Code-compliant frame material for most residential impact installations. Vinyl frames are available and less expensive, but they expand and contract more in South Florida’s heat cycles, which can affect long-term seal integrity. Fiberglass-reinforced frames cost more upfront and are specified for high-performance builds.
- Retrofit vs. full-frame replacement: A pocket or retrofit installation drops a new impact unit into the existing frame opening without disturbing the surrounding stucco or drywall. It’s faster, less disruptive, and less expensive – typically $150 to $250 less per opening in labor alone. Full-frame tear-outs are necessary when the existing frame is damaged, corroded, out of plumb, or when you’re changing the rough opening size. In older Fort Lauderdale neighborhoods like Progresso Village and Flagler Village, where original 1950s and 1960s aluminum frames are common, full replacements are often the cleaner path even if they cost more.
- Story height and access conditions: Ground-floor windows on a CBS home in Croissant Park are straightforward. Third-floor windows on a townhouse in Lauderdale Village, or units in a mid-rise building near Las Olas Boulevard, require scaffolding, lift equipment, or HOA-approved staging – all of which add to the labor figure. We document the access conditions during the measured survey so the written price reflects the actual job, not an optimistic estimate.
- Broward County permit and inspection requirements: Fort Lauderdale requires a building permit for every impact window installation. This is non-negotiable under Florida Building Code Section 1609 and Broward County amendments. The permit fee scales with the project’s declared valuation, typically running $75 to $350 for a whole-house project. Some installers quote without permit fees to show a lower number; we include them in the written price because they’re part of the real cost and because unpermitted impact work won’t satisfy a homeowner’s insurance carrier or a future buyer’s inspection.
- Glass specification (SHGC and U-factor): Fort Lauderdale’s climate means solar heat gain – SHGC – matters more than insulation value (U-factor) for most of the year. A standard laminated impact glass unit with a low-E coating can reduce solar heat gain by 40 to 55 percent compared to clear single-pane glass. That coating adds $50 to $150 per window in product cost, but the reduction in cooling load is measurable on your FPL bill. We specify SHGC and U-factor in the written scope so you can compare product lines on documented performance, not marketing language.
Fort Lauderdale-Specific Factors You Won’t Find in a National Guide
Fort Lauderdale’s geography creates a few cost and specification considerations that don’t show up in generic pricing guides written for the national market.
Salt air and corrosion: Properties within a mile of the Atlantic – on A1A in Fort Lauderdale Beach, along the barrier island in Sea Ranch Lakes, or on the Intracoastal in Riviera Isles – see accelerated aluminum oxidation if the frame’s coating isn’t specified for marine environments. We regularly inspect frames in these zones during measured surveys and note the corrosion grade in the written scope. Marine-grade finishes add $30 to $80 per frame but extend the useful life by years in those conditions.
HOA and historic district approvals: If your home is in one of Fort Lauderdale’s historic districts – portions of Victoria Park, Rio Vista, or the historic core near Sailboat Bend – the City’s Historic Preservation Board may require review before a permit is issued. That approval process can add two to six weeks to a project timeline. We flag this during the initial survey so it’s not a surprise mid-project.
Insurance premium offset: Florida’s residential property insurance market in 2026 is well-documented in its difficulty. Most insurers writing policies in Broward County offer a windstorm mitigation discount for homes with compliant impact windows throughout. That discount can run $400 to $1,200 per year depending on your carrier, your home’s construction type, and the coverage value. The offset doesn’t change the installation cost, but it’s part of the real financial picture – and it’s a number worth requesting from your insurer before you finalize a budget.
Spring 2026 supply note: Lead times on custom-configured units from CGI and PGT have been running 6 to 10 weeks from the Fort Lauderdale market as of early 2026, driven by residential hurricane hardening demand across Broward and Miami-Dade counties. Standard configurations from ES Windows and ECO Window Systems are generally available in 2 to 4 weeks. We confirm lead times during the measured survey and write them into the project scope so you’re not estimating from memory when hurricane season arrives.
How to Save on Impact Window Installation
There are legitimate ways to reduce the cost of impact window installation in Fort Lauderdale without cutting corners on compliance or quality. There are also false economies that look like savings on day one and cost more by year three. Here’s how to tell the difference.
Choose Retrofit Over Full-Frame Where the Existing Frame Qualifies
If your existing aluminum frame is structurally sound, plumb, and free of significant corrosion, a pocket installation drops a compliant impact unit into place without disturbing the surrounding surface. The labor savings are real – $150 to $250 per opening – and the finished result is the same wind rating as a full replacement. During the measured survey, we assess each opening and note in the written scope which installs qualify for retrofit and which require a tear-out. You’re not paying for full replacements where a retrofit is the right call.
Batch the Project
Replacing all your windows in one project costs less per unit than doing them in three phases. Mobilization, permitting, and inspection are largely fixed costs – splitting the project multiplies them. A homeowner in Tarpon River who replaced 14 windows across two separate contracts paid permit fees twice and mobilization charges twice. Doing the full scope in one permitted project would have saved roughly $900 on those fixed costs alone. If budget is the constraint, talk to us about a documented phased contract with pricing locked at the time of survey – but under one permit where the city allows it.
Specify to the Opening, Not to the Brochure
A bedroom window that faces an interior courtyard doesn’t need the same glass specification as a large south-facing picture window absorbing direct afternoon sun. Over-specifying uniform premium glass across every opening adds cost without adding proportionate value. The measured survey identifies each opening’s orientation, size, and exposure so the spec matches the actual performance requirement. You’ll see the line-item product spec for each opening in the written price before any work starts.
Understand What’s in the Quote Before Signing
The most common source of cost surprises in Fort Lauderdale impact window projects is a quote that excludes permit fees, stucco repair, or disposal. When you’re comparing written estimates, confirm that each one includes the Broward County building permit, all inspections, removal and disposal of existing units, and any surface repair. Our written price includes all of those line items. If you have a competitor’s written estimate and want a second set of eyes on what’s in it, we’ll review it at no charge – that’s Sightline’s Free Second Opinion.
Check Your Insurance Carrier Before Finalizing the Scope
Some Broward County insurers have specific requirements – particular impact ratings, NFRC certification, or documented product approval numbers – that must appear in the installation record for the windstorm mitigation discount to apply. Installing compliant windows and then discovering your carrier required a specific approval number not listed in the permit is a fixable but avoidable situation. We confirm the product approval numbers during specification so the documentation the insurer receives matches what they need.
For a written price on your specific openings, call (754) 666-7478. The measured survey is free, and the written price you receive is the one that goes on the invoice – no revisions after the fact.
Fort Lauderdale Impact Window Permits: What the Process Actually Looks Like
A Broward County building permit is required for every impact window installation in Fort Lauderdale – no exceptions under the Florida Building Code. Here’s what the process typically involves so it’s not an abstraction on your project timeline.
After the measured survey and signed contract, we submit the permit application to the City of Fort Lauderdale Building Services Division. The application includes the product approval numbers for each window unit, a signed and sealed survey of the property (required for most residential projects), the contractor’s license information, and the project valuation. Review typically takes 5 to 15 business days for a standard residential submission, though Fort Lauderdale’s building department has been running closer to 8 to 12 business days for most of 2026.
After installation, a city or county inspector visits the site to verify compliance with the approved plans. We schedule and coordinate that inspection. The inspector issues a final approval, which closes the permit and creates the permanent record you’ll reference when selling the home or filing a windstorm mitigation certificate with your insurer. Every one of those steps, and the documented photo record from installation, goes into the job file the customer keeps.
Unpermitted impact window work in Fort Lauderdale is a liability that follows the property, not the contractor who cut the corner. It won’t satisfy a four-point inspection, won’t support an insurance discount claim, and will surface in a buyer’s due diligence. The $75 to $350 permit cost is not where to find savings.
Impact Window Glass: What the Specifications Actually Mean
Two numbers appear on every impact window’s product label that are worth understanding before you compare quotes: SHGC (Solar Heat Gain Coefficient) and U-factor.
SHGC measures how much solar heat the glass transmits into the home. A lower number means less heat – in Fort Lauderdale’s climate, where air conditioning runs 9 to 10 months of the year, this is the more consequential of the two numbers. Standard laminated impact glass runs around 0.55 to 0.70 SHGC. A unit with a low-E coating can bring that down to 0.25 to 0.35. On a south-facing living room wall in Coral Ridge, that difference is measurable on your utility bill.
U-factor measures heat transfer through the glass assembly – relevant in climates with cold winters, which Fort Lauderdale doesn’t have. It matters more for the building envelope credit under Florida Energy Code than for comfort in this market. A U-factor of 0.50 or below satisfies Florida’s residential energy requirements for most projects.
When we specify a window unit in the written scope, the SHGC and U-factor appear in the product line item. You’re comparing documented performance numbers, not manufacturer marketing language.
FAQs: Impact Window Installation Cost in Fort Lauderdale
How much does impact window installation cost per window in Fort Lauderdale?
The all-in cost per window in Fort Lauderdale in 2026 runs $850 to $2,800, covering the window unit, labor, permit allocation, and disposal. The lower end of that range reflects standard aluminum single-hung units installed via retrofit on a ground-floor opening. The higher end reflects large, custom-configured casement or picture windows requiring a full-frame tear-out, surface repair, and premium laminated glass. Most straightforward single-family home windows in neighborhoods like Sailboat Bend or Tarpon River land between $950 and $1,600 installed. Call (754) 666-7478 for a written price specific to your openings – the estimate is free.
What does a whole-house impact window replacement cost in Fort Lauderdale?
A whole-house replacement on a typical single-family home with 8 to 12 windows costs $9,500 to $22,000 in Fort Lauderdale. Larger homes in Coral Ridge, Harbor Beach, or Rio Vista with 14 to 20 windows typically run $16,000 to $38,000. Those ranges include all product, labor, permits, inspections, and disposal. Adding entry doors or sliding glass doors to the scope adds $1,200 to $4,500 per door depending on configuration. Call (754) 666-7478 for a line-item written price – it’s the same document that becomes your invoice.
Are there permits required for impact windows in Fort Lauderdale?
Yes. Every impact window installation in Fort Lauderdale requires a Broward County building permit under the Florida Building Code. The permit fee runs $75 to $350 for most residential projects, depending on the declared project valuation. The permit process includes a final inspection that closes the record and supports your windstorm mitigation certificate for insurance purposes. Any installer who proposes skipping the permit is creating a liability that attaches to your property title. We include permit fees in the written price from the start. Call (754) 666-7478 if you have questions about how permitting affects your project timeline.
How much can I save on homeowner’s insurance by installing impact windows in Fort Lauderdale?
Most Broward County insurers writing residential windstorm coverage offer a discount of $400 to $1,200 per year for homes with compliant impact windows throughout. The exact amount depends on your carrier, your home’s construction type (CBS homes typically see higher credits), and your total coverage value. To capture the full discount, the installation must be permitted, inspected, and documented with the correct product approval numbers – all of which are part of the job file we deliver. Check with your insurer before installation to confirm their specific documentation requirements.
How long does impact window installation take in Fort Lauderdale?
Installation of a full house of 8 to 12 windows typically takes one to two days of on-site work once the permit is in hand. The longer part of the timeline is permit processing, which runs 8 to 15 business days through Fort Lauderdale’s Building Services Division. Lead time for window fabrication ranges from 2 to 4 weeks for standard configurations (ES Windows, ECO Window Systems) to 6 to 10 weeks for custom-specified units from CGI or PGT as of early 2026. The written scope you receive after the measured survey includes confirmed lead times and a documented project schedule. Call (754) 666-7478 to start the measured survey and get a real timeline for your project.
Is it cheaper to repair or replace impact windows in Fort Lauderdale?
For hardware failures – locks, balances, weatherstripping – repair is almost always the right answer, running $80 to $350 per window depending on the component. For glass damage, the answer depends on whether the frame is also compromised. Replacing a single damaged impact glass pane in an intact frame typically costs $200 to $500 per unit. But if the frame shows significant corrosion (common in Fort Lauderdale’s coastal zones), is out of plumb, or was installed without a permit, replacement is the cleaner path – both for performance and for the insurance and resale documentation you’ll eventually need. We assess the condition of existing frames during the measured survey and note the recommendation in writing before any decision is made.
Why Fort Lauderdale Homeowners Use Sightline for Impact Window Pricing
The question we hear most often from Fort Lauderdale homeowners who call us after getting two or three quotes is some version of: “The prices are all different – how do I know what I’m actually comparing?” That’s a fair question, and it usually has a straightforward answer once you look at what each quote includes.
Sightline Windows & Doors has completed more than 18,000 window and door installations since 2012, every one of them with a written price in hand before a tool was lifted. The measured survey we conduct at your home is the quote – not an approximation revised after the fact. The product specification, opening-by-opening labor scope, permit fees, disposal, and surface repair are all line items in that document. You keep the measured survey whether or not you use us for the project.
Sonia Raman, who leads Sightline, built the business around the principle that a homeowner researching a major project deserves to see prices on the page and documentation on the job site – not a verbal assurance and a handshake. The Haven Standard’s five clauses govern every job we do: written price before work starts, arrival on schedule, verified and background-checked crews identified by license number, a documented photo record left when the job is done, and the 365-Day Done Right Promise if anything isn’t right. Those aren’t selling points; they’re the operating standard written into every job from the first survey to the final inspection sign-off.
If you’re in Fort Lauderdale and researching impact window installation, the measured survey is where the real pricing conversation starts. It costs nothing, and the written price you walk away with is the one that goes on the invoice.
Key Takeaways
- Impact window installation in Fort Lauderdale runs $850 to $2,800 per window all-in, or $9,500 to $22,000 for a typical whole-house project.
- Broward County building permits are required for every installation and cost $75 to $350 – include them in your budget from the start.
- Retrofit installs save $150 to $250 per opening in labor compared to full-frame tear-outs, where the existing frame qualifies.
- Most Fort Lauderdale insurers offer windstorm mitigation discounts of $400 to $1,200 per year for properly documented impact window installations.
- Lead times for custom-configured units from PGT and CGI are running 6 to 10 weeks from the Fort Lauderdale market in 2026.
- The written price you receive from Sightline is the same document as the measured survey – no revisions, no surprises after the work starts.
Get a Written Price for Your Fort Lauderdale Home
The ranges on this page are accurate for the Fort Lauderdale market in 2026, but the number that matters is the one specific to your openings, your existing frames, and your block’s permit requirements. That number comes from a measured survey – a visit where we read each opening, note the access conditions and frame condition, confirm the product specification, and hand you a written price before we leave.
Sonia Raman and the Sightline team serve homeowners across Fort Lauderdale – from Flagler Village and Sailboat Bend to Las Olas Isles and Harbor Beach – and across Broward County. The measured survey is free. The written price is yours to keep. And our phones are answered by a live person, not a callback queue.
Call (754) 666-7478 to schedule your measured survey. If you’re comparing quotes and want a second set of eyes on a written estimate you already have, bring it – the Free Second Opinion review costs nothing.
You can also learn more about Sightline Windows & Doors and the Haven Standard that governs every project we take on.
Written by Sonia Raman, Owner at Sightline Windows & Doors Fort Lauderdale, serving Fort Lauderdale since 2012. Pricing reflects the Fort Lauderdale market as of 2026. Sightline Windows & Doors Fort Lauderdale offers free estimates – call (754) 666-7478.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale
What Our Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C.