New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide
PGT sliding and patio door repair in Fort Lauderdale typically runs $340-$1,200 for component replacement and $2,800-$6,500 for full unit installation, depending on whether we’re addressing a failed roller assembly, damaged track, or complete frame compromise. We stock PGT-compatible rollers, handles, locks, and weatherstripping for same-day field replacement across the Winguard, EnergyVue, and ClassicVue series, and we carry the full current catalog for full-unit swap when the frame itself has failed. Most Fort Lauderdale owners first notice the problem when the door sticks in summer humidity, won’t lock flush, or rattles during a storm - signs that the roller carriage, track profile, or multipoint locking system has given way to salt air and repeated thermal cycling.
Which PGT Models This Applies To
PGT marks its sliding and patio door series with distinct frame profiles and glazing specifications, and the parts are not interchangeable across lines. The Winguard series carries the Miami-Dade HVHZ impact certification and uses a heavier roller carriage rated for laminated glass weights up to 180 lbs per panel; EnergyVue and ClassicVue use lighter-duty assemblies that will fail prematurely if swapped into an impact-rated opening. We verify the series by the etched mark in the glass corner, the frame depth measurement (2-5/16″ for Winguard vs. 2-1/8″ for EnergyVue), and the roller housing shape - Winguard uses a stainless steel truck with Delrin wheels, while EnergyVue runs a zinc-plated truck with nylon.
OEM PGT rollers and locks ship from Venice, Florida, with a 3-5 day lead time; we also stock quality aftermarket equivalents from C.R. Laurence and Truth Hardware that meet the same load ratings at roughly 30% lower parts cost. The aftermarket decision depends on whether the original part failed from design or from environment - in Fort Lauderdale’s salt-air zones like Coral Ridge or Harbor Beach, we often see OEM stainless components outlast zinc-plated alternatives by four to six years, which changes the math on a $90 roller set.
Sightline Windows & Doors Fort Lauderdale is an independent service provider; we are not affiliated with PGT Industries.
Before
AfterSigns Your PGT Sliding & Patio Door Is Failing
- The door sticks or requires shoulder force to move. This usually means the roller carriage bearings have seized or the wheels have flat-spotted from running on a damaged track. In Fort Lauderdale, we see this accelerate after hurricane season when grit and salt deposit in the track profile and grind the Delrin or nylon wheels.
- The panel drops and scrapes the threshold when opened. The roller height adjustment screw has backed out, or the roller housing itself has cracked from repeated impact against the track stop. PGT’s adjustment range is 3/4″ on most series; once that’s exhausted, the roller needs replacement, not readjustment.
- The multipoint lock won’t engage or the handle spins freely. The lock mechanism’s internal cam has worn, or the shootbolts have corroded in their housings. Winguard series locks use a stainless steel cam; EnergyVue cams are zinc and fail faster in coastal Fort Lauderdale conditions.
- Visible daylight or water intrusion at the meeting stile or frame. The weatherstrip pile or compression seal has compressed past recovery, or the interlock gasket has pulled from its groove. PGT’s pile height is 5/16″ on standard series and 7/16″ on impact-rated; using the wrong replacement guarantees continued leakage.
- The glass fogs between panes or the frame shows corrosion pitting. The insulated glass unit’s edge seal has failed, or the anodized coating on the frame has broken down at the weep slot locations. This is not a field-repairable condition; the panel or full unit requires replacement.
Replacement Cost & What’s Included
| Service | Parts Range | Installed Range | What’s Included |
|---|---|---|---|
| Roller carriage replacement (pair) | $85-$190 | $340-$580 | OEM or aftermarket rollers, track cleaning, height adjustment, operation test |
| Multipoint lock/handle set | $120-$280 | $420-$720 | Lock mechanism, handle, keepers, alignment, function test |
| Track repair or replacement | $140-$340 | $520-$920 | Track section or full profile, substrate repair if rotted, re-level |
| Weatherstrip replacement (full perimeter) | $60-$140 | $280-$480 | Pile, fin seal, compression gasket by opening size |
| Full PGT sliding door unit (installed) | $1,800-$4,200 | $2,800-$6,500 | Unit, freight, removal, disposal, install, trim, seal, permit if required |
What drives the range: frame material (vinyl vs. aluminum), glass specification (impact-rated laminated vs. standard IG), opening width (single vs. multi-panel), and whether the substrate requires repair. Our quote is the measured survey you keep; the final invoice matches it. Every replacement carries our 365-Day Done Right Promise under the Haven Standard, and we document the installed condition with a photo record you receive by text.
DIY or Call Us?
An owner can safely inspect the roller adjustment screw, clean the track with a vacuum and dry brush, and verify the lock keeper alignment with a flashlight. These checks cost nothing and sometimes solve the symptom.
Where DIY goes wrong: removing a PGT sliding panel requires lifting 80-180 lbs of glass while the panel is out of its track, and the roller carriage is held by screws that seize in aluminum frames. We’ve seen cracked glass, bent tracks, and stripped screw holes from owners who used a pry bar where a rubber mallet and proper lift angle were needed. The multipoint lock mechanism contains spring-loaded shootbolts under tension; disassembly without the correct release sequence can launch components or damage the lock body beyond repair.
We carry PGT-compatible rollers, locks, and weatherstrip on every service vehicle in Fort Lauderdale. Call (754) 666-7478 and we’ll confirm the part by series and measurement, or schedule a field visit where we bring the correct component and install it on the same trip.
FAQs
Five to eight years for standard series in coastal exposure, eight to twelve for Winguard stainless assemblies, assuming quarterly track cleaning. Salt air and sand from beach-proximate properties like those along A1A near Lauderdale-by-the-Sea cut that by roughly 30%. Call (754) 666-7478 for an exact quote on replacement - estimates are free.
Sometimes. If the issue is a misaligned keeper or a loose set screw, adjustment resolves it in fifteen minutes. If the internal cam is worn or the shootbolts are seized with corrosion, the mechanism is sealed and non-serviceable; replacement is the only reliable fix. Call (754) 666-7478 for an exact quote - estimates are free.
Most component replacements run 45-90 minutes on site, assuming the parts are correctly specified in advance. Full unit replacement requires one to two days, including removal, substrate inspection, install, and sealant cure. We schedule arrival windows and text technician license numbers before arrival - Haven Clause 3, Verified Crews.
We stock rollers, handles, lock sets, and weatherstrip for Winguard, EnergyVue, and ClassicVue series on every Fort Lauderdale service vehicle. OEM-specific glass or frame extrusions ship from PGT’s Venice facility with a lead time we disclose before you commit. Call (754) 666-7478 to confirm availability for your series and symptom.
Measure it right the first time or measure it twice on someone else’s dime. That’s the principle Sonia Raman built Sightline around in 2012, after too many years of watching poorly measured openings become expensive callbacks across Fort Lauderdale and the Intracoastal corridor.
Ready to fix your PGT sliding door? Call (754) 666-7478 to schedule your free estimate. We’ll bring the measured survey, the written price, and the correct part - and you’ll have the photo record before we leave.
Written by Sonia Raman, Owner, Sightline Windows & Doors Fort Lauderdale at Sightline Windows & Doors Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
