PGT Door Installation Nationwide | Sightline Windows & Doors Fort Lauderdale

PGT Door Installation: The Fort Lauderdale Owner’s Guide

PGT door installation in Fort Lauderdale typically runs $1,850-$4,200 for a standard impact-rated entry or patio door, depending on series, size, and whether the frame needs reframing. We stock PGT-compatible hardware, thresholds, and seal kits on every truck, and most replacements can be surveyed and installed within one to three business days. Most owners realize something’s wrong when the door sticks in summer humidity, daylight shows under the threshold, or the sweep starts dragging concrete - all signs that the installation, not just the door itself, is failing.

Call (754) 666-7478

Which PGT Models This Applies To

PGT builds three door families that dominate Fort Lauderdale homes: the WinGuard aluminum impact series, the PremierVue vinyl line, and the legacy ClassicVue aluminum units still common in Coral Ridge and Rio Vista builds from 2010-2018. The installation hardware differs materially between them. WinGuard uses a heavier-duty adjustable threshold with a composite cap rated for repeated impact cycling; PremierVue thresholds are vinyl-capped and sit lower, which matters when you’re matching a replacement to an existing tile height. Check the etched PGT logo in the glass corner and the silver AAMA certification sticker on the frame edge - the series code (WGD for WinGuard, PVU for PremierVue) tells us which threshold profile, sweep length, and jamb depth to order.

We specify OEM PGT thresholds and compression seals for every installation we touch. Aftermarket equivalents exist, but we’ve measured too many that run 1/8 inch thin on the cap wall or use a softer durometer bulb seal that collapses within two Fort Lauderdale summers. The OEM part costs more upfront. The callback costs more later. We keep both WinGuard and PremierVue threshold assemblies in stock, along with the extended-length sweeps PGT requires for its 8-foot door heights - a common mismatch we see when other installers substitute standard 80-inch hardware on a 96-inch slab.

Before

After

Signs Your PGT Door Installation Is Failing

• The door binds or sticks seasonally. In Fort Lauderdale, aluminum frames expand roughly 1/8 inch per 10 feet of frame between January and August humidity. If the installation was shimmed tight without expansion clearance, the slab presses against the jamb every summer. We see this most in Victoria Park stucco homes where the original installer didn’t account for the frame’s thermal movement.
• Daylight visible under the threshold or around the perimeter. This means the compression seal has lost its memory, the threshold cap has cracked from UV exposure, or the installation shim stack has settled. PGT’s bulb seals are EPDM rubber rated for 10-year UV resistance, but Fort Lauderdale’s reflected heat off concrete pool decks can cut that in half on south-facing doors.
• Water intrusion at the sill after heavy rain. PGT thresholds are designed with a dam and weep system, but if the installation pan flashing was skipped or the sealant bead failed at the subsill, water tracks behind the threshold. We’ve pulled installations in Harbor Beach where the wood subsill was punky after three years of hidden leakage.
• The sweep drags or squeaks on the threshold. Either the sweep is the wrong length for the door height, or the threshold cap has worn a groove that catches the sweep lip. PGT specifies a 3/4-inch sweep gap for most residential doors; a 1/2-inch aftermarket substitute will drag within months.
• Latch misalignment that worsens over time. This usually traces to hinge screw pullout in a soft frame or installation shims that compressed. PGT’s multi-point lock systems need precise strike alignment; 1/16 inch of frame shift and the deadbolt won’t throw fully.

Replacement Cost & What’s Included

Here’s how PGT door installation pricing breaks down for Fort Lauderdale properties:

The spread depends on three things we document in writing before any work starts: whether the existing frame is square within 1/4 inch on the diagonal, whether the subsill needs replacement due to water damage, and whether the stucco or trim must be cut back for proper flashing access. Our measured survey gives you a single written price that includes parts, labor, sealant, and disposal. The 365-Day Done Right Promise covers the installation workmanship; OEM PGT components carry the manufacturer’s warranty against defect. We pull permits when the scope requires it, and every finished job leaves a documented photo record of the rough opening, the installed frame, and the sealed perimeter.

DIY or Call Us?

There’s a short list an owner can safely check: verify the door swings freely in dry weather, look for cracked threshold caps or missing screw covers, and confirm the sweep isn’t visibly torn. Beyond that, PGT door installation involves specific torque sequences on multi-point locks, precise shimming to maintain warranty clearance, and sealant beads that must bridge dissimilar materials without trapping water. We’ve been called to Las Olas Isles homes where a well-intentioned threshold replacement trapped water in the subsill because the pan flashing wasn’t integrated correctly. The repair then required cutting stucco. Measure it right the first time or measure it twice on someone else’s dime. If you’re seeing binding, leakage, or visible daylight, call (754) 666-7478 and we’ll survey it at no charge.

FAQs