New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Installation: The Fort Lauderdale Owner’s Guide
Mr-Glass window installation in Fort Lauderdale typically runs $340 to $780 per opening for standard replacement, with impact-rated units starting around $620. We stock Mr-Glass hardware and keep common sash, frame, and glazing bead profiles on our trucks for same-day starts when the measurement matches. Most Fort Lauderdale owners discover a problem when they feel Gulf Stream humidity pushing through a compromised seal or when the sash won’t stay open against a summer storm wind.
Which Mr-Glass Models This Applies To
Mr-Glass builds three residential lines that move through South Florida: the MG-2000 single-hung and horizontal roller series, the MG-Impact line rated for Miami-Dade HVHZ zones, and the MG-Architectural fixed and geometric shapes. The label you’re looking for sits on the sash edge or the frame head, stamped with a six-digit lot number and the MG prefix. The MG-2000 uses a 2-5/8 inch frame depth with a snap-in glazing bead; the MG-Impact jumps to 3-1/4 inches and uses a wedge-gasket system that isn’t interchangeable.
We’ve seen owners order MG-2000 replacement sashes for MG-Impact frames because the visible glass sizes are close. The glazing pocket depth differs by 5/8 inch, which means the sash seats wrong and the weep system blocks. We stock both profiles and verify against the stamped label before we unload the truck. For hardware, we carry OEM Mr-Glass balances and rollers, plus a tested aftermarket line for the MG-2000 when the lead time on factory parts runs past two weeks. The aftermarket rollers use the same 1-1/4 inch nylon wheel but with a stainless axle; we’ve tracked them across 340 installs and the failure rate matches OEM at roughly six years in Fort Lauderdale salt air.
Before
AfterSigns Your Mr-Glass Window Installation Is Failing
- The sash drops or won’t stay raised. This points to a failed coil balance or a broken balance shoe in the jamb liner. In Fort Lauderdale, we see this accelerate when owners pressure-wash the tracks and push chlorinated water into the balance chamber.
- Visible moisture between glass panes. The insulating glass unit seal has failed. On Mr-Glass units built 2015 to 2019, we’ve noted a higher incidence of seal breach on the southern exposure windows where daily thermal cycling peaks; the desiccant saturates and the fog becomes permanent.
- Frame corner gaps or sealant separation. The window is shifting in the rough opening, either from original shim failure or from the expansion and contraction of a stucco surround that wasn’t backer-rodded properly. This is structural, not cosmetic.
- Hardware operates with grinding or catching. The roller assembly has flat-spotted or the track has accumulated aluminum oxide. Near the Intracoastal Waterway corridor, we find this at year four instead of year eight due to salt particulate in the air.
- Air infiltration at the meeting rail or frame perimeter. The weatherstrip has compressed past recovery or the interlock is out of true. On MG-Impact units, this also compromises the pressure rating; the window may still look intact but won’t perform under load.
Replacement Cost & What’s Included
| Scope | Price Range (Fort Lauderdale) |
|---|---|
| MG-2000 sash replacement (standard size) | $340 - $520 |
| MG-Impact sash replacement (impact-rated) | $620 - $890 |
| Insulating glass unit (IGU) replacement | $280 - $460 |
| Balance/roller hardware set | $180 - $290 |
| Full frame replacement (existing opening) | $740 - $1,180 |
The range depends on three factors: whether the unit is impact-rated (MG-Impact requires Miami-Dade NOA documentation on every piece), whether the rough opening needs reframing, and whether we’re matching a custom grid or tint. Our written quote lists each line item; the measured survey you keep and the final invoice are the same document. Every install carries the 365-Day Done Right Promise under the Haven Standard, and we leave a documented photo record of the completed opening.
DIY or Call Us?
An owner can safely check the label location and photograph any visible damage for our review. What goes wrong after that: MG-Impact units weigh 40 to 60 pounds per sash depending on glass make-up, and the temporary support of a removed sash is where most DIY attempts fail. A dropped sash cracks the glass, damages the frame, or worse. The balance system on the MG-2000 stores roughly 15 pounds of constant tension; releasing it without the proper winding tool can snap the coil into the jamb or into your hand.
We don’t write this to discourage competence. We write it because we’ve been called to fix the second problem after the first fix went wrong. If you’re holding a part number and a measurement, call (754) 666-7478 and we’ll confirm compatibility before you commit to anything. Estimates are free, and we stock what we quote.
FAQs
Expect 15 to 20 years for the frame and 8 to 12 years for the insulating glass unit seal in standard coastal exposure. Direct salt spray from the Intracoastal or oceanfront can compress that to 10 and 6 respectively; inland Fort Lauderdale near Plantation or Davie sees the longer end. Call (754) 666-7478 for an exact condition check - estimates are free.
Hardware failures - balances, rollers, locks - are repairable. Fogged IGUs and cracked frames are not; the IGU is a sealed factory assembly and the frame is extruded as a single profile. We carry both repair parts and full replacement units, and we’ll tell you which applies to your specific label. Call (754) 666-7478 to schedule a look.
A standard sash swap takes 45 to 90 minutes per opening. Full frame replacement runs 3 to 5 hours including interior and exterior trim work. We schedule by the job, not by the hour, and we don’t leave until the photo record is complete and you’ve signed the scope verification. Call (754) 666-7478 to book.
We stock MG-2000 and MG-Impact glazing beads, common sash sizes, balance assemblies, and roller hardware. Custom geometric shapes and certain MG-Architectural profiles ship from the factory in 10 to 14 days. We verify stock against your label before we dispatch. Call (754) 666-7478 with your six-digit lot number and we’ll confirm same-day availability.
Sightline Windows & Doors Fort Lauderdale is independently owned and operated under the Haven Standard. We are not affiliated with Mr-Glass; we are an independent installer and service provider. We also stock parts for PGT, CGI, and CWS window systems.
Sonia Raman, who leads our operation, keeps that running list of product failures she started back in Burbank. Her rule on every Fort Lauderdale job site remains the same: measure it right the first time or measure it twice on someone else’s dime. That standard governs every one of the 18,000+ openings we’ve touched since 2012.
Call (754) 666-7478 to schedule your free estimate. A live person answers, 24/7. You’ll receive a measured survey you keep, a written price before any work starts, and a documented photo record when the job is done.
Written by Sonia Raman, Owner, Sightline Windows & Doors Fort Lauderdale at Sightline Windows & Doors Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
