New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ViewLux Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide
We stock and install ViewLux-compatible sliding and patio door systems in Fort Lauderdale, with typical installed pricing from $2,800 to $6,400 depending on size, impact rating, and frame material. Most ViewLux units we source arrive within 3-5 business days, and we schedule installation the day after delivery so you’re not living with a compromised opening any longer than necessary. The failure usually announces itself gradually: the panel starts catching at the sill, the lock set feels gritty, or you notice daylight leaking through the jamb during a summer storm.
Which ViewLux Models This Applies To
ViewLux produces several sliding and patio door series, and the part you need depends on when your unit was manufactured and whether it’s impact-rated or non-impact. The VistaGlide series (2016-present) uses a 2.5-inch tandem roller assembly with a stainless steel housing; the older Horizon line (pre-2016) runs a 1.75-inch single-wheel roller with a zinc housing that corrodes faster in salt air. Check the etched mark on the glass corner: VistaGlide carries a “VG” prefix, Horizon an “HZ.” The lock sets are not interchangeable between series.
We carry OEM ViewLux rollers, handles, and lock sets, but we also stock quality aftermarket equivalents from Truth Hardware and Barton Kramer where the OEM lead time stretches past two weeks. For impact-rated units, we stay with OEM or Miami-Dade NOA-matched alternatives; for non-impact, the aftermarket saves 20-30 percent with equivalent cycle testing. One compatibility gotcha: the VistaGlide 8-foot panel uses a 32-inch track cap, but the 6-foot panel uses a 28-inch cap, and suppliers often ship the wrong one if you only specify “VistaGlide.”
Sightline Windows & Doors Fort Lauderdale is an independent service provider, not affiliated with ViewLux.
Before
AfterSigns Your ViewLux Sliding & Patio Doors Is Failing
- The panel drags or requires shoulder pressure to move. This usually means the tandem roller assembly has flat-spotted or the axle bearings have seized. In Fort Lauderdale, we see this accelerate when sand and salt accumulate in the track cap groove and grind against the rollers every time the door opens.
- Water pools on the interior sill after a storm. The weep system is clogged, or the sill cap gasket has hardened and lost compression. ViewLux sills rely on a dual-channel drain; if the exterior channel is blocked by debris, water backs up through the interior weep slots.
- The lock thumbturn rotates but the deadbolt doesn’t engage. The actuator fork inside the mortise lock has cracked or the cam has worn. This is a security issue, not just an operation issue, because the door appears locked when it isn’t.
- Visible daylight between the panel and jamb when closed. The pile weatherstrip has compressed past recovery, or the panel has dropped on worn rollers and no longer seats square in the frame. In either case, your air conditioning is cooling the patio.
- The tempered glass shows a haze or white etching at the edges. This is seal failure in an insulated glass unit, common in units facing direct afternoon sun without adequate overhang. Once the desiccant saturates, the view goes cloudy and the thermal performance drops measurably.
Replacement Cost & What’s Included
| Service | Typical Range in Fort Lauderdale |
|---|---|
| Roller assembly replacement (OEM) | $340 - $520 |
| Roller assembly replacement (aftermarket) | $260 - $410 |
| Mortise lock set replacement | $380 - $590 |
| Sill cap / track repair | $440 - $720 |
| Insulated glass unit (IGU) replacement | $680 - $1,240 |
| Full panel replacement (impact-rated, installed) | $2,800 - $6,400 |
What drives the range: size of the opening, impact vs. non-impact rating, and whether the frame substrate needs repair from water intrusion. Every quote we write in Fort Lauderdale starts with a measured survey you keep, and the final invoice matches that document. Haven Clause 1: the price is named before any work starts. The 365-Day Done Right Promise covers labor and installation; OEM parts carry the manufacturer’s warranty, aftermarket parts carry our own 2-year replacement guarantee.
DIY or Call Us?
There are two things a ViewLux owner can safely check without tools: whether the track cap is clogged with debris (vacuum it out), and whether the weep holes are blocked (a pipe cleaner works). Beyond that, the work gets technical fast. Removing a 90-pound glass panel to access rollers requires a suction cup and two people; reinstalling it without twisting the frame takes shimming experience. The mortise lock interfaces with a multi-point system, and misalignment means the deadbolt misses the strike.
We don’t recommend DIY on impact-rated units because any field modification voids the Miami-Dade Notice of Acceptance and your insurance carrier may decline a future claim. If you’re unsure which series you have or whether the failure is in the part or the frame, call us. We’ll bring the measured survey, the written price, and the right components for your specific unit.
FAQs
In coastal Fort Lauderdale, we typically see 7 to 12 years from OEM rollers and 5 to 8 years from economy aftermarket units before flat-spotting or corrosion sets in. Units within a quarter-mile of the Intracoastal or the ocean tend toward the shorter end. Call (754) 666-7478 for an exact quote - estimates are free.
Sometimes. If the actuator fork is intact and only the cylinder is worn, we can rekey or replace the cylinder for roughly half the cost of a full lock set. If the fork is cracked or the cam is worn, replacement is the only reliable fix. We carry both options on our trucks in Fort Lauderdale.
Removal and installation of a single ViewLux sliding panel takes 3 to 5 hours for a standard 6-foot opening, 5 to 7 hours for an 8-foot or multi-panel configuration. We pull permits when required, and every job leaves a documented photo record. The price we write is the price you pay - no change orders.
We stock the most common failure items: VistaGlide and Horizon roller assemblies, mortise lock sets, handle sets, and pile weatherstrip in standard widths. Specialty glass or custom-sized IGUs we order with a 3-5 day turnaround. If we don’t have it, we’ll tell you before we schedule, not after we arrive.
Ready to get your ViewLux sliding door working properly again? Call (754) 666-7478 to schedule your free estimate. We’ll bring the measured survey, name the price in writing before any work starts, and leave you with a documented photo record when the job is done. Measure it right the first time or measure it twice on someone else’s dime.
Written by Sonia Raman, Owner, Sightline Windows & Doors Fort Lauderdale at Sightline Windows & Doors Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
