New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Installation: The Fort Lauderdale Owner’s Guide
ECO Window Systems window installation in Fort Lauderdale typically runs $340-$780 per opening for standard vinyl replacement units, depending on series, size, and whether the existing frame is preserved or fully removed. We stock ECO Window Systems-compatible hardware and flashing kits on our Fort Lauderdale trucks, and most measured surveys convert to installation within 5-10 business days. Homeowners usually discover an installation problem when they feel drafting around the sash, see water staining at the sill after a summer storm, or notice the lock no longer draws the meeting rails tight - all signs the original install compromised the window’s designed performance.
Which ECO Window Systems Models This Applies To
ECO Window Systems manufactures three residential series relevant to Fort Lauderdale: the ECO 5000 single-hung vinyl line, the ECO 6000 double-hung with reinforced interlock, and the ECO Impact line carrying Miami-Dade Notice of Acceptance for HVHZ zones. The critical compatibility gotcha is the frame depth: 5000 series uses 2-5/8 inch jamb depth, while 6000 and Impact jump to 3-1/4 inch. Order the wrong retrofit insert and the interior stop won’t seat flush against drywall.
Identification starts with the etched NFRC label in the upper right corner of the glass, which carries the CPD number and series designation. If the label’s sun-faded - common on east-facing Fort Lauderdale installations after eight years - measure the visible glass width and height, then the frame depth at the head jamb. We cross-reference against ECO’s 2017-2024 spec sheets, which we keep archived because the company revised its interlock geometry in 2019 and again in 2022.
On OEM versus quality aftermarket: ECO Window Systems sells replacement sashes and hardware through authorized distributors only, with a 4-6 week lead time on custom sizes. We source OEM for Impact-rated units because the Miami-Dade NOA requires documented component traceability. For 5000 and 6000 series in non-HVHZ applications, we use Florida-made aftermarket interlocks and balances that match ECO’s extrusion profiles and carry the same 10-year warranty - at roughly 60% of OEM cost. The decision is documented in your written scope, not made for you.
Before
AfterSigns Your ECO Window Systems Window Installation Is Failing
- Visible gap at the meeting rail when locked. The interlock weatherstrip has compressed past recovery or the sash tilt mechanism has slipped its pivot pin. In Fort Lauderdale’s humidity, vinyl expands 1/16 inch per 4 feet of frame; a lock that drew tight in January may not in August if the installer didn’t account for seasonal expansion in the shimming.
- Water staining on the interior sill after rain. The sill pan flashing was omitted or the end dams were sealed with caulk instead of backer rod and sealant. ECO’s installation manual specifies a minimum 6-inch head flashing lap; we’ve found shortcuts on roughly one in four Fort Lauderdale re-installs we survey.
- Condensation between glass panes. The insulated glass unit (IGU) seal has failed. ECO Window Systems IGUs carry a 20-year warranty, but the warranty transfers to the original purchaser only - a detail that burns second owners on Las Olas corridor condos purchased after 2018.
- Sash drops or won’t stay open. The balance system - coil spring on 5000, block-and-tackle on 6000 - has reached cycle fatigue. Standard ECO balances are rated for 10,000 cycles; in Fort Lauderdale, where windows stay open six months of the year, that translates to roughly 8-10 years of actual use.
- Frame corner separation or visible bowing. The original installer used fasteners spaced too far apart or drove screws through the hollow chamber without anchor blocks. This is structural failure, not maintenance - the window needs full replacement, not adjustment.
Replacement Cost & What’s Included
| Scope | Price Range (Fort Lauderdale) | What’s Included |
|---|---|---|
| ECO 5000 series, retrofit insert, standard size | $340-$520 | Unit, measured survey, removal, disposal, interior/exterior trim seal, photo record |
| ECO 6000 series, full-frame replacement | $580-$780 | Unit, frame, sill pan with end dams, head flashing, insulation, trim, photo record |
| ECO Impact series, full-frame, HVHZ | $720-$1,100 | Unit, HVHZ-rated hardware, Miami-Dade documentation, permit coordination, photo record |
| IGU replacement (glass only, sash retained) | $180-$340 | New IGU, desiccant-filled spacer, low-E coating match, re-glaze, photo record |
| Balance or interlock hardware replacement | $120-$220 | Parts, adjustment, operation test, photo record |
What drives the range: size (anything over 40 inches wide needs reinforced sashes), floor level (third-story carries ladder and staging cost), and frame condition. If the rough opening has rot from prior leakage - we see this weekly in Coral Ridge and Rio Vista homes built 1955-1975 - the repair is priced separately and shown on the same document. Haven Clause 1: the measured survey you keep and the written quote are the same document. No change orders, no surprises.
Every installation carries the 365-Day Done Right Promise under the Haven Standard. If the lock doesn’t draw tight or the sill leaks in the next rainy season, we return and correct it - documented in the same photo record system that tracked the original job.
DIY or Call Us?
What you can safely check: verify the lock engages fully, run a dollar bill around the closed sash to feel for drag gaps, and inspect the exterior sill for cracked sealant. These are observations, not repairs - they tell you whether to schedule a survey.
Where DIY goes wrong: removing a sash to access a balance on a double-hung unit risks dropping the glass; ECO 6000 sashes weigh 18-25 pounds depending on size. Impact-rated units use laminated glass that cannot be cut in the field - a cracked pane means full IGU replacement. And any work on a Fort Lauderdale home in a flood zone may require documentation for insurance purposes; our photo record satisfies that requirement, your cellphone snapshots may not.
We’re an independent service provider - not affiliated with ECO Window Systems - and we’ve installed their products since adding the line in 2017. Call (754) 666-7478 to schedule your free measured survey. We’ll bring the spec sheets, measure twice, and hand you a written price before any work starts.
FAQs
A properly installed ECO 5000 or 6000 series unit lasts 15-20 years in Fort Lauderdale’s climate; the Impact line, with its heavier frame and laminated glass, often reaches 25 years. Salt air within two miles of the Intracoastal accelerates hardware corrosion, which is why we specify 316 stainless fasteners on coastal jobs. Call (754) 666-7478 for an exact quote - estimates are free.
IGU seal failure, balance fatigue, and weatherstrip compression are all repairable. Frame corner separation, chamber cracks, or warped sills require full replacement. We determine which category applies during the measured survey and note it on the written scope. Call (754) 666-7478 for an exact quote - estimates are free.
A standard retrofit insert in an existing ECO frame takes 2-3 hours per opening. Full-frame replacement with sill pan and flashing runs 4-6 hours. We schedule one opening per day for occupied homes, or multiple openings for vacant properties, and we specify the timeline on the written scope before work begins. Call (754) 666-7478 for an exact quote - estimates are free.
We stock 5000 and 6000 series balances, interlocks, and weatherstrip kits; Impact-series hardware is ordered to the specific NOA revision because Miami-Dade requires traceability. For full units, we measure first and order to the rough opening - because a window that doesn’t fit isn’t a window, it’s a callback. Measure it right the first time or measure it twice on someone else’s dime. Call (754) 666-7478 for an exact quote - estimates are free.
Written by Sonia Raman, Owner, Sightline Windows & Doors Fort Lauderdale at Sightline Windows & Doors Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
