New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Lighthouse Point
Window replacement in Lighthouse Point, FL typically runs $800-$1,500 per opening for impact-rated units, with whole-home packages starting around $8,000 and scaling past $25,000 for larger or custom configurations. Most projects move to install once your units arrive from fabrication, which runs 4-6 weeks for custom HVHZ-rated glazing. Call (754) 666-7478 to schedule your free measured survey; we’ll hand you the written price before any work starts.
We serve Lighthouse Point from our South Florida scheduling office, with crews working the canal neighborhoods between the Intracoastal and Atlantic daily. You know the salt here doesn’t negotiate. Neither do we. Every address in this city sits inside Broward County’s High-Velocity Hurricane Zone, the strictest impact-window code tier in Florida, and the salt-air exposure from two directions compresses frame life compared to any inland Broward city. That combination is why we specify marine-grade hardware and stainless fasteners as standard on every Lighthouse Point opening, not as an upgrade.
Why Sightline Windows & Doors Fort Lauderdale Is Lighthouse Point’s Preferred Window Replacement Company
We’ve replaced windows on canal-front ranches from Lighthouse Drive to the Venetian Isles, and the pattern repeats: original aluminum single-hung frames pitted through, weep holes choked with white oxidation, thresholds rusted out while the glass itself still looks passable. Our Window Replacement team documents every opening with the photo record you keep, and the written quote we hand you after measurement is the same document that governs the final invoice. Haven Clause 1: Have it in writing.
Our crews are background-checked, uniformed, and identified by license number before arrival. Haven Clause 3 means the person at your door matches the person on the record. Live phone coverage runs 24/7, not a callback queue. The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy; if it’s not done right, we make it right. Since 2012, every one of the 18,000+ openings we’ve touched has left with a written price before work started and a documented photo record when it finished.
Before
AfterOur Window Replacement Services in Lighthouse Point
Full Frame Replacement
Most Lighthouse Point homes need this, not insert replacement. The 1950s-1970s ranch stock here was built with aluminum single-pane or jalousie louver systems that are categorically non-compliant with current HVHZ standards. We remove the entire frame, inspect the rough opening for salt damage or rot, and install a new impact-rated unit with marine-grade sealed jambs and stainless hardware. On a canal-front ranch off Lighthouse Drive, we pulled original aluminum single-hung units whose frames had pitted through and whose weep holes were packed solid with white oxidation from years of two-directional Intracoastal and canal salt exposure. We reset the openings with PGT impact-rated glazing on a laminated glass interlayer, stainless hardware throughout, and marine-grade sealed jambs and thresholds, then documented the full-opening compliance the homeowner needed after a kitchen permit triggered a whole-house exterior-opening review.
Insert Window Replacement
Rare in Lighthouse Point, but possible when an existing vinyl or wood frame is structurally sound and the opening is already HVHZ-compliant. We measure the existing frame to accept a new sash and insulated glass unit without disturbing the exterior trim. The savings are real on qualifying openings, but most local housing stock predates impact compliance and won’t qualify. We’ll tell you straight after measurement if insert replacement is viable for your specific opening.
Vinyl Replacement Windows
We specify vinyl frames from CWS and ECO Window Systems with multi-chamber construction and welded corners for the salt-humid Lighthouse Point environment. The key is the coating and the hardware: standard-grade fasteners pit here in half the time they last in Lauderdale Lakes. We upgrade to stainless or hot-dip galvanized hardware as part of our coastal spec, not as an add-on. The price gap between coastal-spec and inland-spec is typically 12-18% on materials, but the cheap spec costs more when you’re replacing corroded thresholds at year eight.
Energy-Efficient Upgrade
Low-E coatings and argon fill matter in Lighthouse Point’s cooling-dominated climate, but the bigger efficiency gain is sealing the envelope against the salt-laden air that infiltrates through failed weatherstripping and corroded frames. We specify U-factor and SHGC values matched to your home’s orientation, with laminated impact glass that blocks UV and reduces solar heat gain. The result is measurable: homeowners who upgrade from single-pane aluminum to impact-rated Low-E units typically see cooling-load reductions that translate to real bill credits, especially on west-facing canal openings that take afternoon sun plus reflected water glare.
Window Maintenance & Care
We don’t sell maintenance contracts. We document what we find. For Lighthouse Point homeowners with newer impact units, our maintenance visits include frame readings, sightline measurements, hardware torque checks, and weep-hole clearing. Salt accumulation in weep channels is the silent killer here; water backs into the jamb, rots the sill, and the first sign is interior drywall staining. We photograph everything and hand you the record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lighthouse Point
We draw from eight verified manufacturer lines and specify by what the opening requires, not by what is in stock. For Window Replacement in Lighthouse Point, we most often reach for PGT and CGI for impact-rated aluminum and vinyl systems, CWS for multi-chamber vinyl with coastal hardware packages, and ES Windows for custom geometric and architectural openings. Each unit carries Miami-Dade NOA and Florida Product Approval numbers matched to its design pressure rating; in Lighthouse Point’s HVHZ zone, we specify to the opening’s wind-load requirement, never above +/-100 PSF. We don’t stock “local parts” because impact windows are fabricated to order; we do maintain direct distributor relationships that keep our Lighthouse Point projects on standard 4-6 week timelines rather than the 10-12 week delays common with big-box retail channels.
Common Window Replacement Problems We See in Lighthouse Point Homes
- Original aluminum frames and jalousie sashes pit and corrode from combined Intracoastal and canal salt exposure, clogging weep holes with oxidation so water backs into the jamb instead of draining. The frame looks intact from the street; the damage is inside the channel where you can’t see it.
- Cheap inland-spec fasteners and standard finishes fail years early here, so thresholds and hardware rust out while the glass itself is still fine. We see this on post-2000 replacements where the previous installer used catalog-standard hardware without upgrading to marine-grade for the coastal environment.
- A minor interior permit can force every exterior opening into current HVHZ impact compliance, leaving homeowners stuck replacing jalousie and single-pane units they never budgeted for. Broward’s building department requires any open permit to bring all exterior openings up to code, so a kitchen remodel can legally trigger whole-house window replacement.
- Failed door threshold seals on canal-facing openings let wind-driven rain infiltrate during summer storms, damaging interior flooring before the homeowner realizes the seal is gone. Salt crystallization in the track accelerates wear; we specify marine-grade bulb seals and document the installation with photos.
What Window Replacement Costs in Lighthouse Point
A typical impact window replacement in Lighthouse Point runs $800-$1,500 per window installed for standard single-hung or horizontal roller openings. Impact single-hung units in common sizes range $900-$1,800. Large picture windows, custom geometrics, or openings above 60 square feet push $2,500-$5,000. Whole-home packages for the 1,800-2,400 square foot ranch homes that dominate this market start around $8,000 and scale past $25,000 depending on opening count, floor height, and whether we’re matching existing architectural profiles.
What moves the price in Lighthouse Point specifically:
- HVHZ compliance adds material cost versus non-impact zones - laminated glass interlayer, reinforced frames, and Miami-Dade NOA documentation are mandatory here, optional elsewhere
- Floor height above grade affects labor and scaffolding on two-story canal homes near the Intracoastal
- Frame material: aluminum with Kynar or anodized finish runs higher than vinyl but lasts longer in salt air
- Custom fabrication for non-standard openings or architectural matching on mid-century ranch profiles
- Stainless hardware and marine-grade sealed thresholds - our coastal spec, not optional for longevity here
The measured survey we conduct is the document you keep. The written quote derived from it cannot differ. That’s Haven Clause 1, and it’s been the founding principle since 2012. Call (754) 666-7478 to schedule yours; estimates are free, and we offer a free second opinion on any competitor’s written estimate.
Florida Pays You Back
Several programs can offset your Lighthouse Point window replacement cost, though final numbers are set by the programs and carriers, not by us. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades; Florida exempts impact-resistant windows and sliding & patio doors from sales tax; and the federal 25C energy credit covers 30% of product cost on qualifying units, capped at $600 per year. After installation, a wind-mitigation inspection ($75-$150) can unlock premium credits averaging around 25% on the windstorm portion of your policy. We document every unit’s Florida Product Approval and Miami-Dade NOA numbers to support your grant and insurance filings.
Pricing for Window Replacement in Lighthouse Point, FL
We name prices because Haven Clause 1 demands it. The ranges above reflect what we actually quote on measured surveys in Lighthouse Point neighborhoods from Venetian Isles to the Coral Ridge Country Club area. Your specific opening count, frame condition, and whether we’re responding to a permit-triggered whole-house replacement or a planned upgrade will set the final number. What won’t change is this: the price we write before work starts is the price on the final invoice. No change orders, no surprises. Call (754) 666-7478 for your free measured survey and written quote.
We Also Serve Cities Near Lighthouse Point
Our crews work daily across Broward County, including Lighthouse Point, Fort Lauderdale, Wilton Manors, Oakland Park, and Lauderdale Lakes. Each city carries different wind-zone requirements and housing-stock profiles; we specify accordingly rather than applying a single template.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Lighthouse Point
You can replace insulated glass units in some frames, but it won’t solve the corrosion or achieve HVHZ compliance. The aluminum channels on 1960s-1970s Lighthouse Point stock have typically pitted through, and the weep systems are compromised by salt oxidation. More critically, single-pane or early insulated units with non-impact glass don’t meet current Broward HVHZ standards, so a glass-only swap leaves you non-compliant and won’t pass inspection if any permit triggers a whole-house review. Call (754) 666-7478 and we’ll assess whether your specific frames can accept impact-rated retrofits or if full replacement is the only compliant path.
It can, if the remodel requires a building permit. Broward County’s building department enforces a rule that any open permit must bring all exterior openings up to current HVHZ impact compliance. We’ve seen homeowners on Lighthouse Drive and in the Venetian Isles start a $15,000 kitchen update and discover they’re legally required to replace original jalousie and single-pane units throughout the house. The workaround is checking your existing permit status before filing the remodel application; we offer free permit-history review as part of our estimate process. Call (754) 666-7478 to check your situation.
Two factors: code and corrosion. Every Lighthouse Point address sits inside Broward’s High-Velocity Hurricane Zone, so a window replacement here must meet impact and design-pressure rules that don’t apply one mile north in Palm Beach County. The exact same opening is two different jobs depending on which side of the county line it sits on. Add the salt-air exposure from Intracoastal and canal fronts on nearly every lot, and the material spec changes again: stainless or hot-dip hardware, marine-grade sealed thresholds, and anodized or Kynar finishes instead of standard powder coat. The coastal-spec job costs more upfront than an inland-spec version, but the inland spec fails early here and costs double within a decade.
Yes, typically by a measurable margin, though the exact percentage depends on what you’re replacing. Original single-pane aluminum units in Lighthouse Point ranch homes conduct heat directly and leak conditioned air through failed weatherstripping. Impact-rated replacement units with Low-E coatings and argon fill reduce solar heat gain and air infiltration. West-facing canal openings see the biggest improvement, since they take direct afternoon sun plus reflected water glare. The federal 25C credit and potential wind-mitigation premium credits add to the return. Call (754) 666-7478 for a written estimate that includes projected efficiency gains for your specific opening configuration.
They can, through the wind-mitigation inspection process. After we install impact-rated units with documented Miami-Dade NOA and Florida Product Approval numbers, a licensed inspector can verify opening protection; carriers typically apply credits averaging around 25% on the windstorm portion of premiums. The inspection costs $75-$150 and must be filed with your carrier; we provide the product documentation you need, but we don’t guarantee specific premium reductions since carriers set final rates. Call (754) 666-7478 to schedule installation and we’ll include the compliance paperwork package.
Ready to see what your specific openings require? Call (754) 666-7478 to schedule your free measured survey. We’ll hand you the written price before any work starts, and the quote we write is the quote you pay. That’s the Haven Standard, and it’s governed every installation we’ve completed since 2012.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Lighthouse Point since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale