New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Coral Springs, FL
Window installation in Coral Springs typically runs $650-$1,400 per opening for standard vinyl replacement, with most homes in the city’s 1970s-1990s subdivisions needing full-frame removal due to stucco-embedded aluminum originals. Because Broward County insurers now require proof of impact-rated openings or impose premium hikes, nearly every job here is a code-compliance retrofit rather than a simple swap. We measure every opening on site, give you the written price before any work starts, and leave a documented photo record when we’re done. Call (754) 666-7478 to schedule your free measured survey.
Why Coral Springs Homes Are Different
Coral Springs was built out almost entirely between the late 1960s and early 1990s as a master-planned community, leaving a dense concentration of pre-Hurricane-Andrew homes with original aluminum single-pane windows that predate Florida’s post-1994 impact-resistance code overhaul. With Broward County insurers now demanding proof of impact-rated openings or imposing steep premium hikes and non-renewals, virtually every windows-and-doors job in Coral Springs is an insurance-compliance retrofit - a dynamic far more concentrated here than in cities with more mixed build eras or newer stock.
The housing stock is remarkably uniform: CBS (concrete block and stucco) single-family homes across planned subdivisions like Ramblewood, featuring original aluminum horizontal-roller or jalousie windows and steel hollow-core exterior doors. Because the build era is so consistent, contractors encounter the same pre-Andrew configuration repeatedly. In these 1970s-80s subdivisions, aluminum slider windows were routinely installed flush and then stuccoed directly over the flange, so removal without cracking the exterior stucco shell requires scoring and careful sawcutting that out-of-area crews often skip, generating costly callback repairs and failed Broward County rough inspections.
Coral Springs sits 12-15 miles inland from the Atlantic, which reduces direct salt-spray corrosion compared to coastal Broward cities, but it sits squarely in the South Florida hurricane corridor. High year-round humidity accelerates weatherstripping failure and causes wood door jambs to swell and rack even in CBS homes.
Before
AfterOur Main Coral Springs Services
Most Coral Springs homeowners who call us are looking for one of these two services, both shaped by the city’s pre-Andrew housing stock and current insurance requirements.
Window Replacement in Coral Springs
We replace original aluminum single-pane and jalousie windows across Coral Springs’s 1970s-1990s subdivisions with impact-rated vinyl or aluminum units that satisfy Broward County’s current wind-borne debris code. Every job starts with a measured survey you keep, and we account for stucco-embedded flanges that require careful sawcutting to avoid exterior damage. Window Replacement in Coral Springs
Impact Windows & Doors in Coral Springs
Impact windows and doors are the standard we install in Coral Springs, driven by insurer mandates and the Florida Building Code’s requirements for the hurricane corridor. We specify products from PGT, CGI, and CWS by performance tier and price range, not by margin, and every unit carries the documentation your insurer needs. Impact Windows & Doors in Coral Springs
Sliding & Patio Doors in Coral Springs
Original sliding glass doors in Coral Springs’s Ramblewood-era homes are typically non-impact aluminum frames with failed weatherstripping and corroged rollers. We replace them with impact-rated multi-panel systems that meet current code and include proper sill pan flashing for the humid climate. Sliding & Patio Doors in Coral Springs
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Coral Springs
Window installation in Coral Springs means working with a housing stock built almost entirely before Hurricane Andrew and Florida’s 1994 code overhaul. The original aluminum single-pane horizontal rollers and jalousie windows in subdivisions like Ramblewood were never designed for current wind-borne debris requirements, and Broward County insurers now routinely demand proof of impact-rated replacements. We begin every Window Installation with a measured survey you keep, and the written quote cannot differ from that document.
Horizontal Roller Windows
Signs you need it
Your existing aluminum rollers no longer seal against the frame, you feel drafts during afternoon thunderstorms, or your insurer has flagged non-impact openings for non-renewal.
What it costs in Coral Springs
Horizontal roller replacement in Coral Springs typically runs $720-$1,250 per opening for impact-rated vinyl or aluminum units, with stucco-embedded flanges adding $80-$150 per window for careful sawcut and patch work.
How we do it
We score the stucco perimeter, sawcut around the embedded flange, remove the original frame without cracking the exterior shell, install the new impact-rated unit with proper sill pan and head flashing, then seal and document the rough inspection before trim.
Single & Double Hung Windows
Signs you need it
Your original single-hung aluminum windows have broken balances, the sashes no longer stay open, or you’re replacing jalousie windows in a 1970s ranch that never had proper egress.
What it costs in Coral Springs
Single and double hung replacement in Coral Springs ranges $680-$1,180 per opening for impact-rated vinyl units, with double hung adding roughly $120-$200 per window for the additional sash hardware and balance system.
How we do it
We measure the rough opening and existing frame depth, specify either pocket or full-frame replacement based on stucco condition, install with integrated J-channel and proper air sealing, then test operation and document the completed opening with photos you receive.
What Window Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Horizontal roller replacement (impact-rated vinyl) | $720-$1,250 per opening |
| Single hung replacement (impact-rated vinyl) | $680-$1,180 per opening |
| Double hung replacement (impact-rated vinyl) | $800-$1,380 per opening |
How long does window installation take in Coral Springs?
Most Coral Springs homes need 2-3 days for a full-house replacement of 12-18 openings, with an additional half-day per window if stucco-embedded flanges require sawcut removal. We schedule Broward County rough inspection between removal and trim, which adds one business day. Call (754) 666-7478 for a specific timeline based on your opening count.
Will the price change once work starts?
No. Haven Clause 1 means the measured survey and the written quote are the same document. We only adjust if hidden rot or structural damage is found during removal, and we document it with photos and stop for your approval before continuing. Call (754) 666-7478 to schedule your free measured survey.
Door Installation in Coral Springs
Door installation in Coral Springs means replacing steel hollow-core exterior doors and original aluminum sliders that predate impact requirements with code-compliant units that satisfy Broward County insurers. The humid climate here swells wood jambs in CBS homes and corrodes original aluminum thresholds, so we specify composite or vinyl jamb systems and stainless or bronze hardware. We begin every Door Installation with a measured survey you keep, and the written quote cannot differ from that document.
Entry Doors
Signs you need it
Your steel hollow-core door dents easily, the jamb has swelled from humidity and no longer latches square, or daylight shows around the weatherstripping.
What it costs in Coral Springs
Entry door replacement in Coral Springs ranges $1,400-$2,800 for impact-rated fiberglass or steel units with composite jambs, with decorative glass inserts adding $400-$900.
How we do it
We remove the original door and frame, inspect the rough opening for moisture damage in the CBS shell, install the new pre-hung unit with composite jambs and three-point locking, then shim, level, and seal with backer rod and sealant before documenting with photos.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurer has required proof of impact-rated openings, your existing door lacks a Miami-Dade or Florida Product Approval number, or you’re replacing a non-rated decorative door installed before 1994.
What it costs in Coral Springs
Hurricane-proof entry doors in Coral Springs run $1,800-$3,400 installed, with high-velocity hurricane zone ratings and multi-point hardware at the upper end of the range.
How we do it
We verify the product approval number against your wind zone requirement, install with impact-rated sidelites or transoms if specified, integrate the multi-point lock with the jamb reinforcement, and provide the documentation your insurer needs.
What Door Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Entry door replacement (impact-rated fiberglass/steel) | $1,400-$2,800 |
| Hurricane-proof front door with multi-point hardware | $1,800-$3,400 |
| Decorative glass insert for entry door | $400-$900 |
Do you pull permits for door installation in Coral Springs?
Yes. Broward County requires permits for all exterior door replacements that change the opening size or rating. We pull the permit, schedule inspections, and pass them before final payment. Call (754) 666-7478 to confirm your specific permit path.
How do I know if my current door is impact-rated?
Look for a Miami-Dade County Notice of Acceptance (NOA) or Florida Product Approval number on a label inside the door edge or frame. If there’s no label, it’s not rated. We verify this during our free measured survey. Call (754) 666-7478 to schedule.
Energy-Efficient Windows in Coral Springs
Energy-efficient windows in Coral Springs address the specific penalty of original aluminum single-pane units in 1970s-1990s homes, where summer cooling loads run high and FPL bills reflect the lack of thermal break. We specify low-E coatings and argon gas fill appropriate for South Florida’s cooling-dominated climate, with U-factor and SHGC values that meet or exceed ENERGY STAR Southern criteria. Every Energy-Efficient Windows project begins with a measured survey you keep, and the written quote cannot differ from that document.
Low-E & Argon Gas Glass
Signs you need it
Your FPL bills spike June through September, you feel radiant heat through the glass even with blinds closed, or your aluminum frames conduct heat to the interior.
What it costs in Coral Springs
Low-E with argon fill adds $60-$120 per opening to standard impact-rated vinyl windows in Coral Springs, with payback typically 4-7 years against cooling costs in pre-Andrew homes.
How we do it
We specify the coating location (surface #2 or #3) and gas fill percentage on the order, verify with the manufacturer’s spec sheet, and confirm the NFRC label values match the quoted performance before installation.
ENERGY STAR Replacement Windows
Signs you need it
You’re replacing windows anyway for impact compliance and want the added efficiency certification for resale value or utility rebate eligibility.
What it costs in Coral Springs
ENERGY STAR certified impact windows in Coral Springs range $780-$1,420 per opening, with the certification adding roughly $40-$80 over non-certified equivalent units from the same manufacturer line.
How we do it
We verify the NFRC label and ENERGY STAR climate zone match, install with complete air sealing around the frame, and document the certification number for your records and any rebate application.
What Energy-Efficient Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Low-E/argon upgrade (add to base impact window) | $60-$120 per opening |
| ENERGY STAR certified impact window | $780-$1,420 per opening |
| High-performance triple-silver low-E upgrade | $120-$220 per opening |
Will energy-efficient windows lower my FPL bill in Coral Springs?
Yes, typically 10-20% in pre-Andrew homes with original aluminum single-pane windows, with the greatest reduction in summer cooling months. We calculate estimated savings using your current window count and orientation. Call (754) 666-7478 for a specific projection.
Do energy-efficient windows still meet impact requirements?
Yes. Every energy-efficient window we install in Coral Springs is also impact-rated; the low-E coating and argon fill are added to laminated or reinforced glass that already meets the wind-borne debris code. We document both ratings. Call (754) 666-7478 to review the spec sheet.
Impact Garage Doors in Coral Springs
Impact garage doors in Coral Springs are increasingly required by insurers reviewing homes with attached garages, where the garage door is the largest opening and weakest point in the envelope. Original non-rated steel or aluminum doors in 1970s-1990s homes provide no wind-borne debris protection and can pressurize the structure during a hurricane. We begin every Impact Garage Doors project with a measured survey you keep, and the written quote cannot differ from that document.
Hurricane-Rated Garage Doors
Signs you need it
Your insurer has flagged the garage door as non-compliant, your existing door lacks wind-load rating labels, or you’re replacing a door that failed or was damaged in a previous storm.
What it costs in Coral Springs
Hurricane-rated garage doors in Coral Springs range $1,800-$3,600 for standard 16×7 two-car openings, with wind-load ratings from 120 to 180 mph and reinforced track systems at the upper end.
How we do it
We measure the opening and header capacity, specify the wind-load rating for your Broward County zone, install with reinforced vertical tracks and heavy-duty hinges, then test cycle and document the rating label for your insurer.
Wind-Load Code Compliance
Signs you need it
You’re selling the home and the buyer’s insurer requires proof of garage door compliance, or your current door was installed before 1994 and has no product approval documentation.
What it costs in Coral Springs
Wind-load code compliance retrofit in Coral Springs runs $2,200-$4,200 if structural reinforcement of the header or jambs is needed, or $1,800-$3,600 for direct replacement on adequate framing.
How we do it
We inspect the header and jambs for structural adequacy, engineer reinforcement if needed, install the rated door and track system, pull the permit, and pass inspection before providing the documentation package.
What Impact Garage Doors Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Hurricane-rated garage door (16×7, standard wind load) | $1,800-$3,600 |
| Wind-load compliance with structural reinforcement | $2,200-$4,200 |
| Heavy-duty opener upgrade (rated for impact door weight) | $450-$850 |
Does my garage door need to be impact-rated if the rest of my house is?
Yes, under Florida Building Code and most Broward County insurer requirements. The garage door is the largest opening; if it’s not rated, the home is not fully compliant. We verify the rating label and provide documentation. Call (754) 666-7478 to schedule an inspection.
Can you match my garage door to my front door?
Yes. We carry raised panel, carriage house, and contemporary designs in steel and aluminum with custom color matching to your entry door or trim. We provide samples during the measured survey. Call (754) 666-7478 to see options.
Custom & Geometric Windows in Coral Springs
Custom and geometric windows in Coral Springs solve the problem of original builder-grade openings in 1970s-1990s homes that lack architectural interest or proper proportion for modern additions. We fabricate impact-rated custom shapes from PGT, CGI, and CWS that maintain code compliance while changing the sightline of the room. Every Custom & Geometric Windows project begins with a measured survey you keep, and the written quote cannot differ from that document.
Geometric & Shaped Windows
Signs you need it
You’re replacing a rectangular window with a gable-end triangle, adding a circular accent over the entry, or matching an original 1980s radius top that failed.
What it costs in Coral Springs
Geometric and shaped windows in Coral Springs range $1,200-$2,800 per opening, with triangles and trapezoids at the lower end and circles or compound curves at the upper end due to fabrication complexity.
How we do it
We template the opening on site with digital or physical patterns, send the template to the manufacturer for fabrication, receive and inspect the unit against the pattern, then install with custom flashing appropriate to the non-rectangular geometry.
Arched & Curved Windows
Signs you need it
Your original arched window has fogged laminated glass, you’re adding a radius-top transom to a new entry door, or your 1980s Mediterranean-style home needs matching replacements.
What it costs in Coral Springs
Arched and curved windows in Coral Springs run $1,600-$3,400 per opening, with true radius construction costing more than segmented approximations that we avoid for sightline quality.
How we do it
We measure the springline, rise, and chord length precisely, specify true radius construction for sightline continuity, fabricate in impact-rated laminated glass, and install with curved head flashing that matches the wall plane.
What Custom & Geometric Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Geometric window (triangle, trapezoid, octagon) | $1,200-$2,800 per opening |
| Arched or curved window (true radius) | $1,600-$3,400 per opening |
| Oversized custom opening (up to 60 square feet) | $3,200-$5,800 per opening |
How long do custom windows take to fabricate?
Standard geometric shapes from CWS or ES Windows ship in 4-6 weeks; true radius or compound curves from custom lines run 6-10 weeks. We order after your approval of the template and written quote, with no deposit until then. Call (754) 666-7478 to start templating.
Are custom shapes still impact-rated?
Yes, every custom or geometric window we install in Coral Springs carries the same Miami-Dade or Florida Product Approval as standard rectangles. We verify the approval number covers the specific geometry before ordering. Call (754) 666-7478 to review the documentation.
Brands We Service in Coral Springs
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - by performance tier and price range, not by margin. For Coral Springs’s humidity and hurricane exposure, we frequently draw from CWS and ES Windows for mid-tier impact vinyl, and ECO Window Systems for high-efficiency specifications. We stock common hardware and weatherstripping locally, so most service calls don’t wait on parts. See our brands for full specifications.
Pricing for Windows & Doors in Coral Springs, FL
| Service | Typical range in Coral Springs |
|---|---|
| Horizontal roller window replacement | $720-$1,250 per opening |
| Single hung window replacement | $680-$1,180 per opening |
| Double hung window replacement | $800-$1,380 per opening |
| Entry door replacement (impact-rated) | $1,400-$2,800 |
| Hurricane-proof front door | $1,800-$3,400 |
| Low-E/argon efficiency upgrade | $60-$120 per opening |
| ENERGY STAR certified impact window | $780-$1,420 per opening |
| Hurricane-rated garage door (16×7) | $1,800-$3,600 |
| Garage door with structural reinforcement | $2,200-$4,200 |
| Geometric window (standard shapes) | $1,200-$2,800 per opening |
| Arched or curved window (true radius) | $1,600-$3,400 per opening |
Prices in Coral Springs push higher when stucco-embedded flanges require sawcut removal, when header reinforcement is needed for garage doors, or when custom geometry demands true-radius fabrication. Haven Clause 1 means your written quote includes every one of these conditions we can see during the measured survey, with no change orders for surprises we should have caught.
Neighborhoods We Serve in Coral Springs
We work across Coral Springs’s full footprint, from the original 1970s sections through the 1980s-90s buildout. Crews dispatch from our South Florida office and typically arrive within scheduled windows across these areas.
- Ramblewood
- Coral Springs Country Club
- Maplewood
- Runnymeade
- Heathers
Service Area - Cities Near Coral Springs
We serve homeowners throughout central and north Broward County, with crews working daily in Margate, FL, Coconut Creek, FL, Pompano Beach, FL, and Plantation, FL. Each city has distinct housing stock and code requirements; we adjust our specifications accordingly rather than applying a Coral Springs template elsewhere.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Coral Springs
Yes. Broward County requires permits for all window replacements that change the impact rating or opening dimensions. We pull the permit, schedule rough and final inspections, and pass them before collecting final payment. The permit documentation becomes part of your insurance compliance file.
Most Coral Springs HOAs approve impact-rated replacements readily because they improve community resilience and insurance rates, though some require color or style matching. We provide product data sheets and finish samples for your architectural review board submission at no charge.
Call (754) 666-7478 any time - a live person answers, 24/7. We’ll schedule a measured survey at your Coral Springs home, which you keep, and provide a written quote that cannot differ from that document. Estimates are free, and we offer a free second opinion on any competitor’s written estimate.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coral Springs Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.