New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Margate, FL
Window and door installation in Margate requires HVHZ-rated product approvals on every opening because the city sits entirely within Broward County’s High-Velocity Hurricane Zone, the strictest replacement jurisdiction in the United States. We install Window Installation and door systems under the Haven Standard, with a written price before any work starts and a documented photo record when the job is done. Call (754) 666-7478 to schedule your free estimate.
Why Margate Homes Are Different
Margate was built out rapidly in the 1960s and 1970s as a planned residential community, producing a dominant inventory of concrete block and stucco ranch-style homes and low-rise condominiums. These units almost universally retain original single-pane aluminum sliding windows and hollow-core or jalousie doors that predate modern HVHZ impact standards by decades.
Although Margate sits roughly 6 miles inland from the Atlantic, salt-laden air still reaches the city and corrodes aluminum window frames, hardware, and weatherstripping within a few years. South Florida’s year-round UV intensity causes seal failures and frame oxidation far faster than in any northern climate. Each approaching hurricane season from June through November triggers a surge in homeowner inquiries, as insurers increasingly require or incentivize impact-glass upgrades to maintain coverage.
Broward County’s HVHZ permitting process requires every replacement window or door, even a single unit, to have a passing product approval with an explicit HVHZ designation on file before a permit is issued. Contractors who order products carrying only a standard Florida Product Approval without the HVHZ line routinely have jobs rejected at inspection, a costly mistake that repeatedly catches crews from Palm Beach or Miami-Dade who are unfamiliar with Broward’s specific approval paperwork.
Before
AfterOur Main Margate Services
These are the two services Margate homeowners call about most, with sliding and patio doors rounding out the common requests.
Window Replacement in Margate
We replace original single-pane aluminum units in Margate’s 1960s and 1970s concrete-block homes with HVHZ-rated impact or energy-efficient windows, pulling permits under Broward County’s strict product-approval requirements. Every measured survey becomes the written quote, and the 365-Day Done Right Promise applies. Window Replacement in Margate covers single and double hung, horizontal roller, and 3-panel sliding configurations.
Impact Windows & Doors in Margate
Impact-rated installation is the non-negotiable baseline in Margate, not a premium upgrade, because every opening must carry an HVHZ-rated product approval. We specify PGT, CGI, CWS, and ES Windows product lines by performance tier and price range, matching the opening to the manufacturer’s explicit HVHZ listing. Impact Windows & Doors in Margate includes full-frame replacement and new-construction installation.
Sliding & Patio Doors in Margate
Original aluminum sliding glass doors in Margate’s ranch-style homes fail at the rollers, weatherstripping, and lock mechanisms, and most lack any impact rating. We replace them with HVHZ-approved multi-panel sliding systems or French door configurations, measured to the exact sightline. Sliding & Patio Doors in Margate includes impact-rated and energy-efficient options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Margate
Window installation in Margate means working with 1960s and 1970s concrete-block construction that was never framed for modern window depths, and every replacement must carry an HVHZ-rated product approval with an explicit Broward County listing. The original single-pane aluminum units we remove daily were installed before Florida had any hurricane-impact requirements, so the rough openings often need reframing, stucco repair, and new nailing fins to accept today’s deeper, heavier impact-rated frames. We measure every opening to the nearest 1/8 inch, produce a written survey the customer keeps, and that document becomes the quote under Haven Clause 1.
Single & Double Hung Windows
Signs you need it
Sashes that won’t stay open, visible daylight through closed meeting rails, or corrosion on the aluminum frame corners where salt air has eaten through the finish.
What it costs in Margate
Single and double hung window installation in Margate typically runs $650-$1,400 per opening for impact-rated vinyl or aluminum units with HVHZ approval.
How we do it
We remove the old unit, inspect the concrete-block rough opening for level and plumb, install new HVHZ-rated frames with corrosion-resistant fasteners, seal with backer rod and silicone, and finish with matching stucco patch and paint.
Horizontal Roller Windows
Signs you need it
Rollers that grind or stick, frames that bow from thermal expansion, or locks that no longer engage because the sash has dropped out of square.
What it costs in Margate
Horizontal roller window installation in Margate typically runs $700-$1,500 per opening for impact-rated units with HVHZ product approval.
How we do it
We lift the old sash, cut and remove the frame, verify the rough opening dimensions against the manufacturer’s HVHZ submittal, install the new roller assembly with shims for drainage slope, and test operation before sealing.
What Window Installation Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Single or double hung window, impact-rated | $650 - $1,400 |
| Horizontal roller window, impact-rated | $700 - $1,500 |
| 3-panel sliding window, impact-rated | $1,200 - $2,800 |
Do you pull permits for window replacement in Margate?
Yes. Broward County requires a permit for every window replacement, and we pull it as part of our standard scope. The permit cannot be issued without the manufacturer’s HVHZ-rated product approval on file, which we verify before ordering. Call (754) 666-7478 for an exact quote - estimates are free.
Will the price change once work starts?
No. Haven Clause 1 means the measured survey and the written quote are the same document. If we find hidden rot or structural damage during removal, we document it, stop, and present a written amendment before proceeding. Call (754) 666-7478 for an exact quote - estimates are free.
Door Installation in Margate
Door installation in Margate requires the same HVHZ-rated product approvals as windows, and the city’s 1960s and 1970s homes present a specific problem: original hollow-core and jalousie doors with no impact rating, installed in concrete-block walls that were never prepped for modern door frames. We replace these with HVHZ-approved entry, French, and storm door systems, measuring the rough opening to the manufacturer’s exact submittal and producing a written quote that cannot differ from that survey.
Entry Doors
Signs you need it
Door slab delaminating at the bottom, frame rot at the sill, or daylight visible around the perimeter weatherstripping.
What it costs in Margate
Entry door installation in Margate typically runs $1,800-$4,500 for an HVHZ-rated fiberglass or steel unit with impact glass and hardware.
How we do it
We remove the old door and frame, inspect the concrete-block opening for level and square, install the new HVHZ-rated pre-hung unit with corrosion-resistant fasteners, shim for proper reveal, and seal with backer rod and low-expansion foam.
Hurricane-Proof Front & Entry Doors
Signs you need it
Insurer requiring impact-rated entry protection, or existing door lacking a Miami-Dade NOA or Florida Product Approval with explicit HVHZ listing.
What it costs in Margate
Hurricane-proof front door installation in Margate typically runs $2,500-$6,000 for a decorative impact-rated fiberglass or aluminum unit with HVHZ approval.
How we do it
We verify the manufacturer’s HVHZ submittal against Broward County’s database before ordering, install the reinforced frame with structural anchors into the concrete block, and schedule inspection with the NOA documentation on-site.
What Door Installation Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Entry door, impact-rated | $1,800 - $4,500 |
| Hurricane-proof front door | $2,500 - $6,000 |
| French or double door, impact-rated | $3,500 - $8,000 |
Do French doors need HVHZ approval in Margate?
Yes. Every exterior door in Margate, including French and double doors, must carry an HVHZ-rated product approval. We specify CGI and CWS lines with explicit Broward County listings. Call (754) 666-7478 for an exact quote - estimates are free.
Can you match my stucco after door replacement?
Yes. We include stucco patch and paint-to-match in our standard scope, documented in the written quote before work starts. Call (754) 666-7478 for an exact quote - estimates are free.
Energy-Efficient Windows in Margate
Energy-efficient window installation in Margate addresses a specific local condition: original single-pane aluminum units with no thermal break, baking in South Florida’s year-round UV intensity and driving cooling loads far above what the 1960s and 1970s homes were designed to handle. We specify Low-E coatings, argon gas fill, and insulated laminated glass from ECO Window Systems and ES Windows, with U-factor and SHGC ratings matched to Broward County’s cooling-dominated climate zone.
Low-E & Argon Gas Glass
Signs you need it
Rooms that overheat by mid-morning, fading on floors and furniture near windows, or utility bills that spike in summer despite the AC running continuously.
What it costs in Margate
Low-E and argon gas glass installation in Margate typically adds $80-$150 per opening to the base window price, with payback in reduced cooling load.
How we do it
We specify the Low-E coating position and argon fill percentage on the written quote, verify the IG unit label at delivery, and document the sealed glass edge and spacer type in the photo record.
ENERGY STAR Replacement Windows
Signs you need it
Windows installed before 2010, or any unit with a U-factor above 0.40 and SHGC above 0.25 for Broward County’s climate zone.
What it costs in Margate
ENERGY STAR replacement window installation in Margate typically runs $750-$1,600 per opening for a complete HVHZ-rated unit with qualifying performance specs.
How we do it
We match the window’s NFRC label to the ENERGY STAR criteria for South Florida, include the U-factor and SHGC on the written quote, and register the installation for any available utility rebate.
What Energy-Efficient Windows Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Low-E and argon upgrade | +$80 - $150 per opening |
| ENERGY STAR replacement window | $750 - $1,600 per opening |
| Insulated laminated glass upgrade | +$120 - $220 per opening |
Will energy-efficient windows lower my electric bill in Margate?
Yes. Original single-pane aluminum units in Margate homes transmit solar heat gain that forces the AC to cycle longer; Low-E and argon-filled IG units reduce that load measurably. Call (754) 666-7478 for an exact quote - estimates are free.
Do energy-efficient windows still need to be impact-rated?
Yes. In Margate, energy efficiency and impact rating are separate specifications on the same unit; every window we install carries both the HVHZ approval and the NFRC performance label. Call (754) 666-7478 for an exact quote - estimates are free.
Impact Garage Doors in Margate
Impact garage door installation in Margate is increasingly required by insurers as a condition of continued coverage, yet the city’s 1960s and 1970s homes were built with lightweight, non-rated sectional doors that offer no wind-load resistance. We replace these with HVHZ-rated wind-load garage door systems, engineered to the specific pressure requirements of Broward County’s High-Velocity Hurricane Zone and installed with reinforced tracks and structural anchors into the concrete-block header.
Hurricane-Rated Garage Doors
Signs you need it
Insurer requiring impact-rated garage door documentation, or existing door lacking a Miami-Dade NOA or Florida Product Approval with explicit HVHZ listing.
What it costs in Margate
Hurricane-rated garage door installation in Margate typically runs $2,200-$5,500 for a complete wind-load system with HVHZ approval and reinforced hardware.
How we do it
We calculate the required wind-load pressure from the door size and exposure category, specify the HVHZ-rated door and track system, and install with structural anchors into the concrete-block header and jambs.
Wind-Load Code Compliance
Signs you need it
Permit application rejected for non-compliant garage door, or home sale inspection flagging the existing door as pre-dating HVHZ requirements.
What it costs in Margate
Wind-load code compliance upgrade in Margate typically runs $2,800-$6,500 for a complete replacement with engineering documentation and inspection-ready submittals.
How we do it
We pull the permit with the manufacturer’s HVHZ submittal, install the wind-load-rated door and reinforced track system, and coordinate inspection with the NOA documentation on-site.
What Impact Garage Doors Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Hurricane-rated garage door | $2,200 - $5,500 |
| Wind-load code compliance upgrade | $2,800 - $6,500 |
| Energy-efficient garage door upgrade | +$300 - $600 |
Does my garage door need a permit in Margate?
Yes. Broward County requires a permit for every garage door replacement, and the product must have an explicit HVHZ listing. We pull the permit and coordinate inspection. Call (754) 666-7478 for an exact quote - estimates are free.
Can you install a hurricane-rated door on my existing track?
No. HVHZ-rated garage doors require reinforced tracks and structural anchors rated to the specific wind-load pressure; the existing track is removed and replaced. Call (754) 666-7478 for an exact quote - estimates are free.
Custom & Geometric Windows in Margate
Custom and geometric window installation in Margate solves a specific problem: the 1960s and 1970s ranch-style homes feature gable-end windows, entryway transoms, and accent openings in shapes that were never produced as standard sizes, yet every replacement must still carry an HVHZ-rated product approval. We measure irregular openings to the nearest 1/8 inch, specify custom-shaped impact units from ECO Window Systems and ES Windows with explicit HVHZ listings, and fabricate to the documented sightline dimensions.
Geometric & Shaped Windows
Signs you need it
Trapezoid, triangle, or octagon windows with fogged or cracked glass, or frames that have corroded at the miter joints where salt air collects.
What it costs in Margate
Geometric and shaped window installation in Margate typically runs $1,500-$4,000 per opening for a custom impact-rated unit with HVHZ approval.
How we do it
We template the opening with a full-size pattern, submit the sightline dimensions and angles to the manufacturer for HVHZ submittal verification, and install with custom flashings to match the stucco profile.
Arched & Curved Windows
Signs you need it
Radius-top or eyebrow windows with seal failure showing between the curved and rectangular sections, or wood frames that have rotted at the wet joint.
What it costs in Margate
Arched and curved window installation in Margate typically runs $2,000-$5,500 per opening for a custom impact-rated unit with HVHZ approval and matching radius frame.
How we do it
We measure the spring-line, rise, and chord length to produce a template, verify the manufacturer’s ability to produce the HVHZ-rated curved unit, and fabricate the frame with integral nailing fin for concrete-block attachment.
What Custom & Geometric Windows Costs in Margate
| Item | Typical range in Margate |
|---|---|
| Geometric or shaped window | $1,500 - $4,000 |
| Arched or curved window | $2,000 - $5,500 |
| Oversized custom opening | $3,500 - $8,000 |
Can any shape window be impact-rated in Margate?
Most common shapes can, but the manufacturer must have an explicit HVHZ listing for that configuration. We verify the submittal before templating. Call (754) 666-7478 for an exact quote - estimates are free.
How long does custom window fabrication take?
Typically 6-10 weeks from measured survey to delivery, depending on the manufacturer’s HVHZ-certified production schedule. The written quote includes the expected timeline. Call (754) 666-7478 for an exact quote - estimates are free.
Brands We Service in Margate
We install PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux product lines in Margate, specified by performance tier and price range rather than margin. We stock common hardware and weatherstripping locally for faster turnaround on service calls. See our brands for full specifications.
Pricing for Windows & Doors in Margate, FL
| Service | Typical range in Margate |
|---|---|
| Single or double hung window, impact-rated | $650 - $1,400 |
| Horizontal roller window, impact-rated | $700 - $1,500 |
| 3-panel sliding window, impact-rated | $1,200 - $2,800 |
| Entry door, impact-rated | $1,800 - $4,500 |
| Hurricane-proof front door | $2,500 - $6,000 |
| French or double door, impact-rated | $3,500 - $8,000 |
| ENERGY STAR replacement window | $750 - $1,600 |
| Hurricane-rated garage door | $2,200 - $5,500 |
| Geometric or shaped window | $1,500 - $4,000 |
| Arched or curved window | $2,000 - $5,500 |
Prices in Margate push toward the higher end when concrete-block rough openings require reframing, stucco repair extends beyond the standard patch, or custom shapes need specialized HVHZ-rated fabrication. Haven Clause 1 means the written price before any work starts is the price on the final invoice; the measurement and the quote are the same document.
Neighborhoods We Serve in Margate
We install windows and doors across Margate’s residential areas, from the original 1960s plats to later infill developments. Crews are dispatched from our South Florida office and typically arrive within scheduled windows across the city.
- Oriole Margate Estates
- Palm Springs
- Somerset
- Winfield Park
- Eden Springs
Service Area - Cities Near Margate
We serve homeowners throughout central and northern Broward County, including Coconut Creek, FL, Coral Springs, FL, Pompano Beach, FL, and Plantation, FL. Each city shares Broward County’s HVHZ requirements, though permit submission offices differ; we file correctly for each jurisdiction.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Margate
We answer calls live 24/7 and schedule measured surveys within a few business days. Installation timelines depend on product availability and permit turnaround from Broward County, which we track and communicate in writing.
Some do. We review HOA architectural guidelines before specifying products and include any required submittal documentation in our scope. The written quote notes any HOA-related restrictions or approvals needed.
Broward County requires a building permit for every window and door replacement, with the manufacturer’s HVHZ-rated product approval on file before issuance. We pull all permits and coordinate inspections as standard scope, documented in the written quote.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Margate Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.