New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Tamarac, FL
Window installation in Tamarac typically runs $650-$1,400 per opening for standard vinyl or aluminum units, and $1,200-$2,800 for impact-rated replacements, with most whole-home jobs spanning 12-24 openings completed in 2-4 days. The city’s 1960s-1980s housing stock presents a specific challenge: original aluminum-frame, single-pane windows - including widespread jalousie units - were built for an era before Broward County’s current impact-resistant requirements, making nearly every opening a code-and-insurance-driven replacement candidate. We measure every rough opening on site, account for the framing modifications modern thicker units require, and hand you the written price before any work begins. Call (754) 666-7478 to schedule your free measured survey.
Why Tamarac Homes Are Different
Tamarac was incorporated in 1963 and built out almost entirely through the late 1960s and 1970s as one of South Florida’s first large-scale planned retirement communities. That produced a city-wide housing stock of pre-Hurricane-Andrew CBS homes whose original aluminum-frame, single-pane windows - including large numbers of jalousie (louvered) units - predate Broward County’s current impact-resistant opening requirements by decades. Florida’s accelerating homeowners insurance crisis has made this urgent: carriers are now surcharging or non-renewing policies on homes lacking impact-rated windows and doors, so nearly every original opening in Tamarac is a code-and-insurance-driven replacement candidate simultaneously.
The dominant stock is 1- to 2-story concrete block and stucco single-family homes and low-rise condominiums constructed between roughly 1965 and 1985, with window rough openings sized for the thin aluminum frames of that era. Modern impact-rated units are substantially thicker, requiring contractors to account for framing modifications or buck installation on nearly every job. A large share of these properties sit within HOA communities that impose strict rules on exterior aesthetics, adding an approval step that is common in nearly every Tamarac job but less prevalent in neighboring unincorporated Broward parcels.
Tamarac sits approximately 15 miles inland from the Atlantic, which reduces direct salt-spray corrosion compared to coastal Broward cities but keeps it fully within the hurricane-wind-zone requiring impact glazing under the Florida Building Code. Intense UV, year-round humidity exceeding 70%, and near-daily summer wind-driven rain from June through September expose any degraded frame seals and sill pans almost immediately. Along the corridors of University Drive and McNab Road, we regularly encounter original aluminum jalousie windows still in service; these louvered units provide virtually no hurricane protection, cannot be brought into compliance with a retrofit film or insert, and must be fully removed and replaced. That makes whole-opening replacement - not glass-only swaps - the standard scope of work that distinguishes Tamarac from newer surrounding cities.
Before
AfterOur Main Tamarac Services
These are the two services Tamarac homeowners call about most, plus sliding and patio doors, which we route to dedicated pages.
Window Replacement in Tamarac
Most Tamarac window replacement jobs involve removing original 1960s-1980s aluminum single-pane units and installing modern impact-rated or energy-efficient replacements that meet current Florida Building Code and insurance requirements. We account for the rough-opening size differences on every measured survey, since the thin frames of that era rarely accept modern units without modification. Our crews are background-checked, uniformed, and identified by license number before arrival, per Haven Clause 3. Window Replacement in Tamarac covers full-home projects, partial upgrades, and code-compliance conversions.
Impact Windows & Doors in Tamarac
Impact windows and doors are the primary path to insurance compliance in Tamarac, where carriers increasingly require documented impact-rated openings for policy renewal. We specify products from PGT, CGI, CWS, and ES Windows by performance tier and price range, not by margin, and every quote includes the written price before any work starts. The 365-Day Done Right Promise applies to every installation. Impact Windows & Doors in Tamarac details our impact-rated product lines and compliance documentation.
Sliding & Patio Doors in Tamarac
Tamarac’s older homes often feature original sliding glass doors with thin aluminum frames and single-pane glazing that fail current wind-load and impact standards. Replacement requires careful measurement of the existing rough opening, since modern multi-point locking, impact-rated sliders are deeper and heavier. We handle HOA approval packages as standard on these jobs. Sliding & Patio Doors in Tamarac covers single-panel, multi-panel, and pocket door configurations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Tamarac
Window installation in Tamarac means working with a housing stock where original aluminum-frame, single-pane windows - including widespread jalousie units - predate current impact-resistant requirements by decades, and where insurance carriers now demand documented compliance for policy renewal. Every job begins with a measured survey you keep, and the written quote cannot differ from that document; this is Window Installation under Haven Clause 1. We account for framing modifications or buck installation on nearly every opening, since 1960s-1980s rough openings were sized for frames roughly half the depth of modern impact-rated units.
Single & Double Hung Windows
Signs you need it
Original aluminum single-hung windows that won’t stay open, show corrosion at the sill, or leak during summer wind-driven rain are the most common call we get in Tamarac’s older subdivisions.
What it costs in Tamarac
Standard vinyl single or double hung installation in Tamarac typically ranges $650-$1,200 per opening; impact-rated units run $1,200-$2,400 depending on size and glazing specification.
How we do it
We remove the existing frame, inspect the rough opening for moisture damage common in 1970s CBS construction, install buck framing if needed for the thicker replacement unit, flash and seal to current code, and leave a documented photo record.
Horizontal Roller Windows
Signs you need it
Roller windows that jam, have cracked wheels, or show daylight through the meeting rail are typical of original Tamarac installations where aluminum frames have warped from decades of heat cycling.
What it costs in Tamarac
Horizontal roller replacement in Tamarac runs $700-$1,300 for standard units and $1,300-$2,600 for impact-rated versions with laminated glazing and reinforced frames.
How we do it
We measure the exact sash travel and frame depth, specify the appropriate roller mechanism and screen configuration, and verify the new unit’s operability before the documented final walkthrough.
What Window Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Standard vinyl single/double hung (per opening) | $650 - $1,200 |
| Impact-rated single/double hung (per opening) | $1,200 - $2,400 |
| Horizontal roller, standard (per opening) | $700 - $1,300 |
How long does window installation take in Tamarac?
Most whole-home jobs of 12-20 openings finish in 2-4 days, with single-opening replacements done in one day. HOA approval can add 1-3 weeks before scheduling. Call (754) 666-7478 for a timeline based on your specific project - estimates are free.
Will my HOA approve new windows in Tamarac?
Nearly every Tamarac job involves HOA review; we provide product cut sheets, color samples, and installation specifications as standard documentation. Approval typically takes 7-21 days depending on the association’s meeting schedule. Call (754) 666-7478 and we’ll review your HOA documents during the measured survey.
Door Installation in Tamarac
Door installation in Tamarac addresses a specific gap: original entry doors from the 1960s-1980s construction era are typically hollow-core or thin steel units with minimal weatherstripping and no impact rating, while current insurance and code requirements demand documented wind-load resistance. Every measured survey includes the exact door slab size, jamb depth, and hinge location; the written price covers the complete scope including any framing modification for thicker impact-rated slabs. This is Door Installation under the Haven Standard.
Entry Doors
Signs you need it
Entry doors that show daylight around the jamb, have delaminated skins, or lack a solid feel when closed indicate original 1970s construction that predates current energy and security standards.
What it costs in Tamarac
Standard fiberglass or steel entry door installation in Tamarac ranges $1,200-$2,500; impact-rated entry systems with reinforced jambs and multi-point locks run $2,800-$5,500.
How we do it
We verify rough opening plumb and square - often out of true in 1960s CBS framing - install the pre-hung unit with composite or aluminum-clad jambs, integrate the multi-point locking hardware, and seal with backer rod and urethane to prevent the air infiltration common in older Tamarac homes.
Hurricane-Proof Front & Entry Doors
Signs you need it
Insurance non-renewal notices citing lack of impact-rated openings, or visible corrosion at the threshold and hinge mortises, signal that the existing door cannot meet current Florida Building Code.
What it costs in Tamarac
Hurricane-rated front door systems in Tamarac typically cost $2,800-$5,500 installed, with high-end decorative impact glass and custom sizing at the upper end.
How we do it
We specify the impact rating and design pressure rating required for your exposure, pull permits through Broward County, coordinate inspection, and provide the product approval documentation your insurance underwriter needs.
What Door Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Standard fiberglass/steel entry door | $1,200 - $2,500 |
| Impact-rated entry door system | $2,800 - $5,500 |
| Hurricane-rated front door with decorative glass | $3,500 - $6,500 |
Do I need a permit to replace my front door in Tamarac?
Yes. Broward County requires permits for any entry door replacement that changes the rating or dimensions; we pull permits and schedule inspections as standard scope. The documented photo record includes permit approval for your files. Call (754) 666-7478 and we’ll verify permit requirements during your measured survey.
Can I keep my existing frame and just replace the door slab?
On 1960s-1980s Tamarac homes, the existing jamb is rarely deep enough for modern impact-rated slabs and lacks the structural backing for multi-point locks; we recommend full pre-hung replacement. Call (754) 666-7478 for a frame assessment - estimates are free.
Energy-Efficient Windows in Tamarac
Energy-efficient windows in Tamarac solve a problem intensified by the city’s inland location and year-round heat: original single-pane aluminum windows conduct heat directly into conditioned space, and the 70%+ humidity forces air conditioning systems to work continuously against infiltration. Modern low-E, argon-filled units with insulated frames reduce solar heat gain and air leakage, directly lowering cooling loads in a climate where summer temperatures regularly exceed 90°F. This is Energy-Efficient Windows specified by U-factor and SHGC performance, not by brand alone.
Low-E & Argon Gas Glass
Signs you need it
Rooms with south or west exposure that stay uncomfortably warm despite blinds, or utility bills that spike from May through September, indicate excessive solar heat gain through clear single-pane glazing.
What it costs in Tamarac
Low-E with argon gas fill adds $80-$150 per opening over standard clear glass in Tamarac, with total installed costs of $730-$1,350 for standard-framed units.
How we do it
We specify the appropriate low-E coating for your orientation - spectrally selective for west-facing units, standard hard-coat where heat loss is the concern - and verify argon fill retention with manufacturer certification.
ENERGY STAR Replacement Windows
Signs you need it
Windows that fail the ENERGY STAR criteria for South Florida - U-factor above 0.40 or SHGC above 0.25 - are common in original Tamarac construction and cost measurable money in cooling load.
What it costs in Tamarac
ENERGY STAR certified replacement windows in Tamarac range $850-$1,600 per opening for vinyl-framed units, with premium composite frames at $1,200-$2,200.
How we do it
We document the existing performance baseline, specify replacement units that meet or exceed ENERGY STAR Southern Zone requirements, and provide the product labels and performance data for your utility rebate applications if available.
What Energy-Efficient Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Low-E/argon upgrade (add to base window) | $80 - $150 per opening |
| ENERGY STAR vinyl replacement window | $850 - $1,600 per opening |
| Composite frame ENERGY STAR unit | $1,200 - $2,200 per opening |
Will energy-efficient windows lower my electric bill in Tamarac?
Most Tamarac homeowners see 10-25% cooling load reduction after replacing single-pane aluminum with low-E, argon-filled units, with full payback typically in 5-8 years depending on home orientation and existing insulation. Call (754) 666-7478 and we’ll model the performance difference for your specific openings - estimates are free.
What’s the difference between low-E and tinted glass for Tamarac’s climate?
Low-E coatings reflect infrared heat while admitting visible light; tinted glass absorbs heat and can darken interiors. For Tamarac’s intense UV and heat, we typically specify spectrally selective low-E rather than tint, preserving daylight while rejecting solar gain. Call (754) 666-7478 to compare samples on site.
Impact Garage Doors in Tamarac
Impact garage doors in Tamarac are increasingly required as insurance carriers tighten compliance standards: the garage door is the largest opening in most homes and the most common failure point in hurricane wind events. Original 1970s-1980s garage doors in Tamarac’s CBS homes are typically uninsulated, non-impact-rated steel or aluminum panels that provide no wind-load resistance. Replacement with hurricane-rated, wind-load-compliant doors protects the structure and satisfies underwriter requirements. This is Impact Garage Doors under Haven Clause 5: no surprises in the scope or the price.
Hurricane-Rated Garage Doors
Signs you need it
Insurance non-renewal citing non-compliant garage openings, or original garage doors with no wind-load sticker or product approval number, indicate the door cannot withstand the design pressures required in Broward County.
What it costs in Tamarac
Hurricane-rated garage door installation in Tamarac typically ranges $1,800-$3,500 for standard 16×7 two-car openings, with premium insulated impact models at $3,200-$5,800.
How we do it
We verify the existing header capacity - often undersized in 1970s construction for the weight of modern impact doors - specify the wind-load rating for your exposure category, and install with heavy-duty track and reinforced brackets.
Wind-Load Code Compliance
Signs you need it
Permit records showing the existing garage door predates the 2002 Florida Building Code adoption, or visible corrosion and panel fatigue, mean the door likely fails current wind-load requirements.
What it costs in Tamarac
Wind-load code compliance conversion in Tamarac, including door, track, and hardware, runs $2,200-$4,200 for standard openings; oversize or custom configurations require measured survey pricing.
How we do it
We measure the exact opening, verify the structural backing for wind-load reinforcement, pull permits, install the rated door and track system, and coordinate inspection to provide the compliance documentation your insurer requires.
What Impact Garage Doors Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Hurricane-rated garage door (16×7, standard) | $1,800 - $3,500 |
| Premium insulated impact garage door | $3,200 - $5,800 |
| Wind-load code compliance conversion | $2,200 - $4,200 |
Does my garage door need to be impact-rated for insurance in Tamarac?
Increasingly yes. Multiple Tamarac homeowners have received non-renewal notices specifically citing non-compliant garage openings; we provide the product approval documentation and inspection sign-off that underwriters require. Call (754) 666-7478 to verify your current door’s rating - estimates are free.
Can I add a hurricane brace to my existing garage door instead of replacing it?
Bracing systems have limited effectiveness and do not provide the product approval documentation insurers now require; we recommend full replacement with a rated door and track system for verifiable compliance. Call (754) 666-7478 for a measured survey of your opening.
Custom & Geometric Windows in Tamarac
Custom and geometric windows in Tamarac address a specific design challenge: the city’s 1960s-1980s planned communities include distinctive architectural elements - gable-end windows, entry transoms, and accent openings - that original builders filled with fixed single-pane units now failing on both performance and insurance grounds. Replacing these with custom-shaped, impact-rated equivalents preserves the home’s character while bringing every opening into compliance. This is Custom & Geometric Windows measured to the exact chord and radius, with the written price fixed before fabrication begins.
Geometric & Shaped Windows
Signs you need it
Original triangular, trapezoid, or octagonal windows with fogged glass, corroded frames, or no impact rating are common in Tamarac’s gable-front ranch and contemporary designs from the 1970s.
What it costs in Tamarac
Geometric shaped windows in Tamarac typically range $1,200-$2,800 installed for standard sizes, with complex multi-sided configurations at $2,500-$5,500 depending on fabrication complexity.
How we do it
We field-measure every angle and chord length, produce a full-size template for your approval, and fabricate the unit to exact specification from our PGT or CGI custom lines with documented impact rating.
Arched & Curved Windows
Signs you need it
Arched transoms or curved-top windows above entry doors that have cracked glazing or separated frame joints are typical of 1970s Tamarac construction where thermal expansion has stressed the original aluminum.
What it costs in Tamarac
Arched and curved-top replacement windows in Tamarac run $1,500-$3,200 for standard radius units, with true custom elliptical or segmented arches at $3,000-$6,500.
How we do it
We establish the exact rise and run of the existing arch, verify the structural support for the heavier impact-rated replacement, and coordinate factory fabrication with documented lead times and fixed pricing.
What Custom & Geometric Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Geometric shaped window (triangle, trapezoid, octagon) | $1,200 - $2,800 |
| Complex multi-sided geometric | $2,500 - $5,500 |
| Arched/curved-top window | $1,500 - $3,200 |
How long does custom window fabrication take for Tamarac jobs?
Standard geometric shapes from our verified manufacturer lines typically ship in 4-6 weeks; true custom or elliptical arches may require 8-12 weeks. We confirm exact lead times in the written quote before you commit. Call (754) 666-7478 to start the measured survey and template process.
Can HOA’s reject custom window shapes in Tamarac?
Most Tamarac HOAs regulate color and visible frame profile rather than shape, but we submit full shop drawings and finish samples for approval before ordering to eliminate risk. Call (754) 666-7478 and we’ll coordinate directly with your association.
Brands We Service in Tamarac
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux products in Tamarac, with parts and hardware stocked locally through our Miami office for faster turnaround on warranty and repair calls. See our brands for detailed performance specifications by product line.
Pricing for Windows & Doors in Tamarac, FL
| Service | Typical range in Tamarac |
|---|---|
| Standard vinyl single/double hung window | $650 - $1,200 per opening |
| Impact-rated single/double hung window | $1,200 - $2,400 per opening |
| Horizontal roller window, standard | $700 - $1,300 per opening |
| Impact-rated horizontal roller | $1,300 - $2,600 per opening |
| Standard fiberglass/steel entry door | $1,200 - $2,500 |
| Impact-rated entry door system | $2,800 - $5,500 |
| Low-E/argon upgrade (add to base) | $80 - $150 per opening |
| ENERGY STAR vinyl replacement window | $850 - $1,600 per opening |
| Hurricane-rated garage door (16×7) | $1,800 - $3,500 |
| Premium insulated impact garage door | $3,200 - $5,800 |
| Geometric shaped window | $1,200 - $2,800 |
| Arched/curved-top window | $1,500 - $3,200 |
Prices in Tamarac increase when framing modifications are required for 1960s-1980s rough openings, when HOA-mandated custom colors or finishes are specified, or when structural reinforcement is needed for heavier impact-rated units. The written price you receive before any work starts is the price on the final invoice - Haven Clause 1, no change orders.
Neighborhoods We Serve in Tamarac
We serve homeowners across Tamarac’s established communities, from the original 1960s subdivisions near the city’s northern edge to the condominium developments along commercial corridors. Scheduling and dispatch are coordinated from our Miami office; crews arrive with the measured survey, written scope, and documented photo equipment already prepared.
- Mainlands of Tamarac
- Woodlands Country Club
- Tamarac Lakes
- University Commons
- Kings Point
Service Area - Cities Near Tamarac
Our crews work throughout central and coastal Broward County, with measured survey and installation coverage extending to Fort Lauderdale, FL, Wilton Manors, FL, Oakland Park, FL, and Lauderdale Lakes, FL. Every job in the service area operates under the same Haven Standard: written price before work starts, verified crews, evidence on every job, and no surprises.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Tamarac
We answer calls live 24/7 and typically schedule measured surveys within 3-5 business days; installation follows permit approval and HOA clearance where required. Rush scheduling is available for insurance-deadline situations with documented non-renewal dates.
Nearly every Tamarac job requires HOA architectural review; we provide product cut sheets, color samples, and installation specifications as standard documentation, and we coordinate directly with your association’s management if requested.
Broward County requires permits for any replacement that changes the impact rating, dimensions, or egress compliance of an existing opening; we pull permits, schedule inspections, and provide the approved documentation for your insurance file as standard scope on every job.
Six Reasons Homeowners Choose Sightline Windows & Doors Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Fort Lauderdale Services
What Neighbors Say About Sightline Windows & Doors Fort Lauderdale
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tamarac Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.